- Xsane is supposed to support the Canon lide 35 scanner. It does recognise it. But when trying to preview the scan, it returns the infamous "invalid argument" error. Has anybody solved this problem without buying a hp scanner ? ...
I'm using a SCSI scanner with Ubuntu 8.0.4.4 on a Pentium III, and an adaptec 2906 PCI SCSI card.xsane 0.995 is the version of SANE I am using.I've avoided installing Ubuntu 9.10 / karmic because of numerous problem reports.XSANE starts up, and allows me to set up my settings for scanning using the ...
My Epson SCSI scanner has worked fine in my dual boot Ubuntu/AMIthlon (Amiga emulator) system for the last several years. When I upgraded from Intrepid to Jaunty a few weeks ago it stopped being available to Xsane.It still runs from the Amiga/AMIthlon boot.Trying to run Xsane from Applications>Gr ...
I though I'd post how I made the scanner CanoScan 300 work on my system. It's an old scanner, SCSI. Had been supported by Sane for a long time. I'm posting in the hope future users will find it. I had found http://ubuntuforums.org/showthread.php?t=320018 from three years ago without a solution. Coul ...
My last application to convert fully to Ubuntu. XSANE recognises my scanner on startup as HP 3970. I have also set in advanced options HP 3970. I am using 200 dpi to scan some old photos. Under the other operating system the scan works fine with HP software. With XSANE I get horizontal lines that lo ...
If I can just get my HP Scanjet 8250 to run, then I really have no need to use XP on this machine anymore. However, I've had no luck. I've removed/re-installed. It recognizes the scanner when it launches, and I select my scanner. Here's what typically happens. I make my selections (scan to a PDF and ...
I have a tips to get this popular printer to work on my ubuntu karmic system.After following very many tutorials (UNIXMEN (http://www.unixmen.com/linux-distributions/ubuntu/229-installation-canon-lbp2900-on-linux), Wiki Ubuntu (https://wiki.ubuntu.com/Canon_LBP_2900_HowTo), Ubuntu Community (https:/ ...
Iam using xsane to try and scan a document to computer my scaner is a HP photosmart c3180 it only wants to scan part of document has any one found a way to get round this many ...
I have an Epson Stylus Photo rx620 Scanner/printer combo (whose scanning functionality has stopped working in windows, though photocopying still works by using buttons on the printer so I don't think it's a hardware issue) and a WinTV TV tuner card with the Booktree chipset (878 IIRC). The TVTuner w ...
In Edgy I have this problem, that when I have opened Xsane og try to scan, I get the message: not enough ram.This can simply not be true, as I have plenty of ram. I have had lots of other distributions on the same computer, and none have had any problems with not enough ram. At the moment I have to ...
One of my last remaining problems with Karmic alpha 5 is xsane+canon lide 50 scanner.Application fires up but when I select 'acquire preview' the app jams and I am forced to quit...Any ideas gang?:confused: ...
Once I'd found the scanbuttond kludge to work around the USB_SUSPEND debacle, our Canon N1240 USB scanner seemed to work quite well with 7.04. So when my wife need to copy some papers she was mailing in, she asked how to do it on the new Ubuntu system I'd set up for her.Actually its easier with Xsan ...
I seem to be having a problem since installing the latest Ubuntu. I have a Canon Pixma MP510 multi printer/scanner and I cant get teh scanning to work. I cant seem to find much info regarding this printer. There isnt a printer driver in the packages called mp510, only mp500 or mp520, I used mp520 an ...
xsane sees the scanner, which is into a canon multifunction MP160 printer. However, it refuses to scan . The preview works fine, but clicking the scan button gives an error message."Error during read: Error during device I/O ."My user, is part of the scanner group, so i should have permiss ...
I can't figure out how to specify a particular scan size in xsane. The only place I can find to change size is in preview, where there is a drop down list of choices including letter port. How do I specify an arbitrary size in inches?Running Ubuntu 9.10 ...
Ubuntu 6.06 - Canon N 650U Scannerxsane 0.0991 takes a long time detect scanner or load during start up. Once loaded, when I click the Aquire preview button I get this message:Failed to start scanner: Error during device I/OI have tried to search and find solutions to this but unable to locate any.S ...
hi, I bought a new HP Deskjet F300 All-in-One, and I tried to use it on my Ubuntu machine. The printing works fine, but when trying to use XSANE to scan, I get:Error:failed to open device 'hpaio:/usb/Deskjet_F300_series?serial=CN71AG91GS04KH':Error during device I/Ohelp? ...
I have an HP LaserJet 3300 aio connected via USB. I'm running Dapper Drake (love it).XSane won't scan. It reports: "Failed to start scanner: Document feeder out of documents". There is no document feeder on this scanner. (I never tried this in Breezy, but this post (http://ubuntuforums.org ...
after several months trying to find a good GNU/linux distro, I've found Ubuntu and I might say that he rocks. big thanks to the developpers.one problem I got with it (all the distros I've tried) is that my Canon FB630P isn't recognized at all by xsane, I've tried under the user and root account but ...
Xsane crashes on start-up. Re-installing the software did not help.Simple Scan works fine.Any ideas? ...
After opening Xsane it scans for devices but then tells me 'no devices available'. I have the 3 in 1 (Print, Fax and Scanner) Canon PIXMA MX310 plugged in Via USB and the printer works very well using the MP180 drivers. ...
After scanning with xsane, what format do a save the file in so I can edit the scan? ...
I want to use xsane to scan and copy. Xsane wants you to select the number of pages to be scanned or copied which means that you need to count the pages each time that you load them which is time consuming if you have many pages.. I would like to be able to place documents in the automatic document ...
xsane starts up fine and recognizes my scanner, however 3 random files appear on my desktop upon starting the application and when I try to scan it looks like gnome crashes and take me back out to the login screen.xsane worked fine before I did a upgrade to 8.04.Any help?PS: I've looked her and my u ...
I did a fresh Hardy install and since then xsane doesn't scan properly.It recognises the scanner and seems to start scannig until towards the end of the process I get the error message:"Error during read: Error during device I/O."And the scanning fails, there's no output file.I think my ba ...
I'm having a scanning problem with an HP F-380 PSC and XSane. The problem is this: when I open XSane (version 0.991) it successfully finds my device, but when I click "Scan", it freezes up. I can still force quit and use other apps, but nothing in the program itself. Eventually (less than ...
I know this is an old scanner, but it works just fine on my 32-bit machine.On my 64-bit machine it's recognized and xsane runs, but nothing happens when I try to preview or scan. The scanner does nothing and the xsane GUI boxes hang.I've followed threads on scanner problems but seeing as it works fi ...
I'm new to this forum and Ubuntu in general, I'm hoping somebody can help me with an infuriating scanner problem.I have an older PC (single 32-bit CPU) and loaded Ubuntu onto it. Specifically the special version of Jaunty from the Linux Format magazine's user disk, this includes using KDE along with ...
I have bought a whole new and beautiful Canon Lide 25 scanner and according to Sane website it would work 'good' in my Ubuntu 7.04 Feisty Fawn, so please answer for this Feisty Fawn distro only. Before i had posted this thread:http://ubuntuforums.org/showthread.php?p=3096597&posted=1#post3096597 ...