IBM Director 5.20.1 Installation on an x3550 w/ RSA II

We would like to setup the Director agent and the RSA II adapter to forward hardware alerts (RAID, Power, Disk, and so on). We run SLES 9.x (64-bit) and moving toward SLES 10.x (64-bit), but we keep getting confused on what is needed. The steps below are the ones we think we need, and install order? ...

Ubuntu ssh setup rsa password

i need to connect my ubuntu box (remote computer) to my mac box (don't ask questions) via ssh. i can connect but i need to know how to put the key in (rsa). i've read part of the https://help.ubuntu.com/community/SSH but i'm confused on what i need to do. can somebody help? ...

Unable to ping my BMC LAN IP

I'm trying to configure BMC IP on x3550 M3 machine to enable remote power cycling on other chassis for one of my test.Below is how it looks after i configure. But not sure why I cant ping the IP on a remote machine.Pls shed me some light.Thanks.linux-xv1l:~/Desktop # ipmitool lan printSet in Progres ...

No CAS or CIM protocols reported in Operating System

I have Director 6.1 setup and have it connected to ~15 systems (x3550) with RSA II cards. The RSA cards are on their own network and switch with the Director server and report in on that interface. They work fine. The clients/servers are distributed over three separate networks and both primary inte ...

Handle of cimlister.exe do not stop increasing on Director 6.2.1 .

My customer complains that Handle of cimlister.exe do not stop increasing on Director 6.2.1 with Windows 2003 R2 . Handle was 1700 when they installed , but it became 15000 after one month .This happens on IBM Systems Director Server (x3550 M3) .I am not sure this phenomenon itself is trouble . Bu ...

How can IMM alerts resend to IBM Director ?

I have installed IBM System Director Server v6.2 at a customer with many x3550 M3 and x3650 M3.We decided not installing Director agents on all systems, because we just need HW alerts from new IBM servers. I configured IMM to send HW alerts to IBM Director (as described in TestLab_iMM.Director6111.a ...

Ubuntu unbuntu can not recognize raid drive

I intend to install ubuntu server 10.04 on an IBM blade server x3550 m3. The server has two SAS and two SATA II hard drives, each configured as RAID 1 through a ServeRAID m1015 card. However, ubuntu didn't recognize any hard drives at the installation.Any suggestions? Is there a way that I can load ...

Ubuntu server hardware compatibility (HP&IBM)?

Our company provides personal services and our web-site is our main resource. We have a complicated infrastructure behind it: few servers (both physical and virtual) to support the database, LDAP etc. We used to use RedHat on our severs for years but we would like to migrate to Ubuntu (mainly becaus ...

Server Guide Hanging

I've got an IBM x3550 m3 that is having issues running the Server Guide cd. I have to try and get Win2k8R2 Ent setup on it but it doesn't seem to be working. The Server Guide setup cd seems to get to the Server Guide inital splash screen but doesn't seem to do much more then that. I have updated the ...

IBM RSA II card password across all boxes.

We need to change IBM RSA card password across all boxes. How should we do this..? Will IBM Director 5.1 give us this function ...

How to change the password for RSA/IMM from a central location?

The Company's security policy requires that the password for each RSA/IMM is changed every 30 days for a random password. Each RSA/IMM needs to have a different password.I have hundreds of physical servers in this situation.As far as I know, IBM Systems Director does not offer this kind of resource. ...

Ubuntu How to allow some users to login via SSH with password but require RSA for others?

If I set up an SSH server, how would I allow some users (probably my friends with "desktop user" accounts) to authenticate to the server while forcing others (most likely admins and a few others with sensitive info stored on their accounts) to use an RSA key (to help prevent brute force at ...

SFTP - Using RSA Key authentication. Still prompts for password

Server A: Generated RSA KeyServer B: Added the RSA Key to authorized_keys listSFTP from A to B. Still prompts for password. I will be sftp-ing both from Server B to Server A and 'A to B'. Sever B to Server A works fine. No prompting for password. But from A-B it this is what is happeningsftp -v log. ...

Where can I set the database user id and password for 'data source' in 'Application D.D.' on RSA 6

Below is the the error while I connect to DB2 UDB via the jdbc 'resource reference' define on the 'web dd', it looks like I do not provide the database user & password. but I do really not know how to set it(database user & password) up on the 'deployment' tab of 'application dd'. I knew how ...

Ubuntu Problem with RSA/DSA password-less authentication on Intrepid

I need to set up password-less ssh authentication in order to run parallel calculations in several nodes.I have done this in the past with Hardy, just by following this how-to:http://www.debian-administration.org/articles/152However, for these instructions to work in Hardy I needed to uninstall the ...

Ubuntu Can an ssh password be recovered when using RSA/DSA keys without passphrase?

Can an ssh password be recovered when using RSA/DSA keys without passphrase?I configured my system to be able to login into a server using ssh without having to enter the user password by following this tutorial:http://www.csua.berkeley.edu/~ranga/notes/ssh_nopass.htmlI created the RSA/DSA keys with ...

Ubuntu 9.10 SSH without password (id_rsa) not working

I also have the same problem. but on 9.10.have you solve the problem? It will be wonderful if you can give some hint.Hi all.I'm under Ubuntu server 8.04 and Open-ssh 4.7p1I need to connect via ssh two servers: S1 to S2Now what i do:S1: ssh-keygen -t rsaS2: mkdir .sshS1: cat .ssh/id_rsa.pub | ssh use ...

Ubuntu Ssh without password (id_rsa) dont work

I'm under Ubuntu server 8.04 and Open-ssh 4.7p1I need to connect via ssh two servers: S1 to S2Now what i do:S1: ssh-keygen -t rsaS2: mkdir .sshS1: cat .ssh/id_rsa.pub | ssh user@S2 'cat >> .ssh/authorized_keys'S2: chmod 644 .ssh/authorized_keysThis dont works, if i try to connect S1 to S2 alwa ...

Permission denied (publickey,password,keyboard-interactive)

Good afternoon,I have been trying to figure out what is wrong with my openssh install on AIX 5.3.7.2I have another server that is working with the same configuration!?I am able to log on with root account to the server but no users are able to do so.Here is my output from the login attempt using ssh ...

Critical : Password less ssh failed

I am facing the critical issue with password less ssh on AIX boxes:When I try to login from one server to another server (RSA key enabled) without passord it shows the following message:ssh 10.14.5.143Connection to 10.14.5.143 closed by remote host.Connection to 10.14.5.143 closed.however it works f ...

Ubuntu Ssh authentication; password and keys?

I want to mess around a bit with rsa keys, but my server is headless and when I break ssh it's a huge pain. So can I have authentication set to keys OR password while I test the keys?What would the conf look like if it possible. ...

why sftp prompting password ?

I have node server A(sun) server B(AIX). I try configure sftp so both this can communicate with prompting password.So I generate rsa key at server B(aix) then copy the id_rsa_pub content by ftp id_rsa.pub file from server B to server A followed by cat id_rsa.pub >> authorized_keys. after testi ...

Login Password

I am newbie to ASP ... i am trying to write a code to accept login and passwor from a user and verify through a table created in MySQL.I am just trying to write a code on my own seeking help from code here and there and from my understanding. I am completely zapped :-(((here is my code:-DIM SQLDIM R ...

RSA encryption in VB

i am trying to make a small program to encrypt files using AES, and then have the password from the AES encrypted using RSA for its use of public keys. i've got the AES part working fine and i found a good RSA tutorial here :http://msdn.microsoft.com/en-us/libr...97(VS.80).aspxbut after i encrypt th ...

Ubuntu Add rdesktop password to gnome keyring

I'm running UNR 10.04 on an EeePC and want to avoid having to type in my password each time I start a remote desktop session into my Windows machine, but of course I don't want to store an unencrypted password. Same for an RSA key to a linux server. How do I manually add those to the gnome keyring s ...

RSA II Alert Notification Method for IBM Director

IBM x3550Machine type: 7978 Machine model: AC1 RSA II Firmware: v1.06 (GFEP25A, 07-12-07)I want to setup Alert Notification within a RSA II. The goal was not to use IBM Director for alerting, but just use the RSA II. However, thru testing we discovered that we do not get RAID information (rebuild, m ...

Director's Management Processor Assistant for the RSA II Slimline

Have some questions on the Director's Management Processor Assistant for the RSA II Slimline.1)If I use the "Launch Command Line Interface", Director will open the MPCLI and type in the userid and password to get into the RSA Card.However, it uses the default password and userid, which is USERID, PA ...

RSA card management with Director 5.20

Hi! Is it possible to manage RSA card (Remote Supervisor Adapter II) on system x with IBM director 5.20. Can I change or add user, modify password and apply change to multiple servers? If not with director what is the recommended approach to make changes to RSA cards across all servers? ...

Manage users in RSA card with MPCLI

I have a problem with managing users in the RSA card through MPCLI commands.I want to create a user with "remoteconsole" and "remoteserver" rights.After logging, i tested:>setdialinentry -index 2 -id Student01 -password Student01 -authority remoteconsole,remoteserverbut it fails. While it's writt ...

Problem with RSA key

I am experiencing a login problem to a remote computer using SSH and a pub key.The RSA key, was generated under WinXP via the SecureCRT client. Recently, I have ported to the Suse 10.1 distro. The public key, is stored to the remoted computer I am trying to login.I have installed the RSA key, to my ...

scp still ask for root 's password when executing...

scp still ask for root 's password when executing... last june I have tested scp and have written down notes on scp implementation. When I do again next week I went into problem. both machines are sitting side by side but eventually one of them has go some where at least 400 miles away. watch my ste ...

Ubuntu SSH without a Password

I can't seem to get SSH working without a password using ssh-keygen. The ultimate goal is to get rsync working over ssh without a password for the purposes of a nightly crontab backup across the network which will not be as picky about whether remote filesystems are mounted and such... but I am stum ...

Password less ssh for non root user

I need to set up password less ssh between two machinesfor a non root user(say foo) in order to write somescripts for automating some mundane tasks.To do this i tried following, but is not working <Machine 1>[root@peer1] useradd foo[root@peer1] su foo[foo@peer1] mkdir -p /home/foo/.ssh[foo@pee ...

I am Unable to connect to AD server using SSL while changing the password

I am Unable to connect to AD server using SSL while changing the password of AD Members.Thanks in Advance. Please help.Source Code:public class ChangePass{public static void main (String[] args){ Hashtable env = new Hashtable();String userName="username@domain.com";String samUser=""; String oldPassw ...

Unable to connect to AD server using SSL while changing the password

I am Unable to connect to AD server using SSL while changing the password of AD Members.Thanks in Advance. Please help.Source Code: public class ChangePass{public static void main (String[] args){ Hashtable env = new Hashtable();String userName="username@domain.com";String samUser=""; String oldPass ...

SSH that requires a password via a bash script

I'm trying to create a BASH script that will connect to a remote server, via SSH that requires a password, and then search a log file for the word error, store the output in a file, and then return the file to the local machine. I would like this process to be completely automated and run via cron. ...

Problem Building SQL Stored Procedures for DB2 v/7 z/OS in RAD/RSA

My team has been building SQL stored procedures for DB2 v7 for z/OS in the DB2 Connect Development Center tool. We would like to use RAD/RSA to develop and maintain the stored procedures, but it has been having a few problems:1) When creating the connection to the database, schemas that contain only ...

Running wsadmin ant task on WP 6.1 from RSA 7.5.3

I am migrating an ant build project from RSA 7.0.x / WebSphere Portal 6.0.x to RSA 7.5.3 / WebSphere Portal 6.1.0.2 (WAS 6.1.0.21). The ant used in RSA 7.5.3 is: "Apache Ant version 1.7.0 compiled on December 13 2006"In the 'old' environment the ant build script, running inside RSA, worked fine. Now ...

Ubuntu ssh or scp without password?

I've been trying to do this for two days following instructions on both these websites http://www.linuxjournal.com/article/8600 and http://www.hostingrails.com/forums/wiki_thread/27 and I still have to use a password every time I log in or scp from one computer to the other. I've entered the command ...

ssh works, but not with rsa.

I have managed to get ssh working on our network. However, I cannot get it to use rsa authentication so that we can use passphrases instead of passwords. I have followed the instructions at SuSELinuxSupport: HowToPublicKeyAuthentication exactly and it still prompts me for my password instead of the ...

ssh - still ask for password

I tried to setup two servers so I can ssh without any password asked.I tried a couple of thing without any success I use GNU/Linux on both server with OpenSSH_3.9p1.I use dsa.I found other posts with this problem but never resolved I did the following :On the client run the following commands:$ mkdi ...

SSH with No Password

I've setup ssh without a password a few times before but this perticular connection is giving me a headache. I'm trying to connect between two machines which I will call Z2 and Z4. I've got the same user on both machines with the same passwordSetting up ConnectionZ2 --> Z4On Z2I did the ssh-keyge ...

RSA versus DSA

I was just having a play with SSH and I came across the option to generate RSA or DSA keys. What is the difference between these two options?Also, It was my understanding that this made it unnecessary to type my password. I specified a passphrase and know it asks for that one all the time. Is this n ...

RSA Securid

I am trying to setup a series of RHEL3/4 servers to use the RSA Securid technology for SSH authentication.I have downloaded the client "ACE" software from RSA and installed it.However when I test the connection using the "acetest" script, all I get is an 'access denied' message a ...

ssh keygen; asking for password

I am setting up a server so "userA" is using keys from "serverA" to access "serverB, userB".I created keys using "ssh-keygen -t rsa -f id_rsa" in /home/userA/.sshcopy .pub file to serverB/user B/.sshcopied contents of .pub file into the /.ssh/authorized_keys f ...

Ubuntu ssh with rsa passphrase vs PuTTY

I just moved from WinXP to Ubuntu 8.04 full time. I'm trying to access a remote server via SSH.On Windows, I used putty; I'd put in the remote server address, it would connect, ask if I wanted to save/accept the key or something, I'd hit OK, and then be able to log in to the remote server.On ubuntu, ...

Ubuntu Password - Less SSH Setup for PE

guys i m newbie, trying to setup PasswordLess SSH.What i already tried.ssh-kegen (i tried with both -t rsa and -t dsa)ssh-copy-id to host (and also tried with transfer the .pub file to host with scp command)ssh-addstill locking to help it's still asking password.Environment: i m trying to setup on V ...

Ubuntu SSH from OSX using RSA authentication error

First timer here, so be gentle with me haha!Anyway, I am trying to set up remote login via SSH from my Mac to an Ubuntu desktop. Here is the error i am getting:Permission denied (publickey,password).I'll give background:- Both computers are on the same network- I'm not using the default port 22- I h ...

Supplying password to a .Net web service

Hi, I'm trying to use RSA6 to call a secure .Net web service. I generated a client from the WSDL and am using a JUnit harness at the moment. I have created a JAX-RPC handler that adds the SOAPHeader into the Envelope. I'm having problems creating the Password element and that is the subject of my qu ...

Ubuntu ssh rsa key authentication cache

I have ubuntu 10.04 set-up with correctly with SSH and an RSA key authentication.However after restarting the OS on the client side and connecting to the server, on the first login it asks me for the password. Once that is done then it doesn't task for that password any more, or re-logging in, until ...