Ubuntu WinTV- GO Plus NTSC 44981 LF Install

I'm looking to see if anyone could give me step-by-step help on how to set up a WinTV-GO Plus (NTSC 44981 LF) TV Card under Ubuntu 8.10I've got the cables ready, and the card in. I need a player and a way to set it up to work. Doesn't seem to want to work under restricted drivers either. ...

Ubuntu Mythtv and bt878 livetv crash

I run Ubuntu 10.04 and have mythtv 0.24 autobuilds2.6.32-25-genericAMD X2 3.1Ghz, 4GB of mem, GTX 260, 2x 250GB in storage groupWhen I try to use my WinTV Go card in livetv mode it works till I try to change the channel. Screen goes black for a few secs and either crashes to desktop or displays inte ...

Ubuntu Mythtv and bt878 livetv crash

I run Ubuntu 10.04 and have mythtv 0.24 autobuilds2.6.32-25-genericAMD X2 3.1Ghz, 4GB of mem, GTX 260, 2x 250GB in storage groupWhen I try to use my WinTV Go card in livetv mode it works till I try to change the channel. Screen goes black for a few secs and either crashes to desktop or displays inte ...

Ubuntu Most reliable way to install Broadcom 4310 (rev. 1) drivers?

After a great deal of searching around in the forums and trying all of the solutions posted in the major threads, I still can't get my computer to even detect the wireless card at all. I've read everything I could find and have tried all the major methods, including fwcutter and compiling the driver ...

Ubuntu ati rage xl (rev 27) drivers

I'm running a Compaq proliant ML310, 2.0ghz processor and 512 ram, jaunty.I'm currently dealing with the video lag, fullscreen, games, video,even screen savers (pipes is the only one which seems to work right) all windowed or not. . I've gotten performance a little better by turning the hardware acc ...

Ubuntu Sound Issues (Hauppauge WinTV)

I'm trying to run the sound out from my capture card (Haupauge WinTV bt878/9) into my input on the mother board. I'm getting poor results (i.e. very low volume sound when I watch TV). Any hints, tips, or tricks would be greatly appreciated.Here's the interesting parts of dmesg:[ 46.103224] Linux vid ...

Ubuntu wintv card

This is my firt post i am new here i do not know i am on right place or not please help.I have WINTV NTSC 61381 REV D123 card from Hauppauge its been sitting for long time in the storage now i have monitor that has analog so decide to bring back the card from the store .This is what happining once i ...

Ubuntu Upgraded to 9.10 and lirc isn't working

So, I had Mythbuntu 9.04 working. I have a Hauppauge WinTV-GO just for the remote. It was working great. I upgraded to 9.10 this week and nothing. I try irw and nothing comes out.curt@media1:~$ sudo lsmod | grep lirclirc_i2c 7136 0 lirc_dev 10804 1 lirc_i2ccurt@media1:~$ ps aux | grep lircroot 2942 ...

Ubuntu 9.10 Hauppauge No Video

So I had this working on 9.04 but decided to upgrade to 9.10 and now I can't get mythtv to work.I'm pretty sure I set everything up correctly, but clearly that can't be true.My card is the WinTV-express NTSC 44981 Rev E1B2I've looked around on the forumns for hours and can't find out to get this to ...

Ubuntu Advice for building a Mythbuntu box

i despise vista and only tolerate XP, so being that vista will soon be my only option, i have decided to finally switch over to Ubuntu fully and completely!i am running 8.04 on my desktop when i noticed i have the option to install Mythbuntu.I'd like to build a box specifically for Mythbuntu.Cause i ...

Ubuntu Struggle with WinTV-GO Plus Card

One of the things I try to avoid is buying hardware that doesn't have out of the box support under Linux. After doing some research, I found out that the Hauppauge WinTV-Go Plus had out of the box support under Linux and was recommended by some as the way to go. Originally, I wanted the renowned PV- ...

Ubuntu Hauppauge WinTV IR modules broken in Natty? Previously working in 10.10.

Similar to many out there, I am having problems with Natty AMD64 (Ubuntu 11.04) and LIRC/IR-Keytables.I have a Hauppauge WinTV card (Bt878) (TV card and IR receiver/transmitter) that worked (for the first time) automatically with 10.04 and LIRC. I recently moved over to 11.04, copied my LIRC config ...

Ubuntu WinTV-Go Pro

I have a WinTv-Go pro tv card and wonder if there any others out ther with this card that have it working under unbunt..It has a BT878 decoder and the tuner is a TCL 2002N_6A.. bttv0: Bt878 (rev 17) at 0000:03:01.0, irq: 22, latency: 32, mmio: 0xf37fe000bttv0: detected: Hauppauge WinTV [card=10], PC ...

Ubuntu Once again a Hauppauge WinTV issue

Okay I have been all over these forums for the last 2 days trying to get this to work. I have a hauppauge WinTV PVR card. It is based on the bt878. I know that much. I cannot for the life of me, get this thing to come to life. Here is my dmesg:[17179591.476000] bttv: driver version 0.9.16 loaded[171 ...

Ubuntu Hauppauge WinTV card not working

I'm running Breezy with the 12-9-686 stock kernel. I'm trying to set up this machine as a PVR on MythTVMy tv card is a Hauppauge WinTV NTSC, model 61381 Rev. D123Running bttv by itself gives this:FATAL: Error inserting bttv (/lib/modules/2.6.12-9-686/kernel/drivers/media/video/bttv.ko): Operation no ...

Ubuntu [10.04] Nvidia + TV Tuner (WinTV) will only boot in low gfx mode (help!)

So, I am using:Ubuntu 10.042.4GHz AMD processor1.5GB RAM1GB Nvidia GeForce 9500 GT (up to date drivers -> 260.19.12 as of posting this)WinTV-HVR-1600 (Rev C1A3) from Hauppauge!When I boot I get a message saying that my NVidia hardware failed to initialize. Here is the actual message:(EE) Oct 16 2 ...

Ubuntu Hauppauge WinTV FM doesn't work properly

I am trying to get my tvcard to work in Edgy Eft.Unfortunately alsa mistakes it for a soundcard and when I try to watch tv using tvtime I don't get all channels und most of these I get are very low quality.This is what I get from WinTV:Model 34519 Rev. J160Serial #8314373Tuner Model: LG TAPE_S001D M ...

Ubuntu determined to watch tv

Too determined i think - i want to run tvtime and have tried quite a few angles to get it running. All i get is a quick flash of a black screen and it disappears. Never seen that before without an error message or anything. Used tvtime on this exact machine for a long time but had a big crash and ha ...

Ubuntu 10.04 64-bit freezes randomly with weird screen

I installed 10.04 beta 2, but have all the updates to this point. Everything freezes randomly. I get a weird pattern across the screen and the mouse and keyboard stop working. From what i can tell, the hard drives just keep spinning at whatever speed they were spinning when the freeze occurred. I ha ...

Ubuntu Dual monitors : no signal on the second monitor. driver nv or nouveau

Using ubuntu 9.04 (64 bit)Problem: The driver detects two monitors but there is signal on the second (right side) monitor. The problem exists both with or without "mirror screens" checked.hardware : "GeForce 9800 GT (rev a2)"Drivers : "nv" or its newer replacement ...

Ubuntu Wep wireless issues on Feisty

I installed feisty kubuntu on my laptop last week. Here's the wireless info:Hardware:02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)drivers:ipw2200 148040 0ieee80211 34760 1 ipw2200I have been playing around with the wireless for a couple of days trying ...

Ubuntu CCMP: decrypt failed -- Why do I keep getting this message in the system log???

Currently using Kubuntu Feisty with Linksys WPC54GS card - Broadcom chipset (rev 03). Drivers were installed via use fwcutter. Thank you for the excellent guide on how to setup WPA-2 with static IP : http://ubuntuforums.org/showthread.php?t=318539The problem I am having however is that after making ...

Ubuntu Configuration of Broadcom Dell 1390 on an hp pavillion 2000

Used Feisty AMDx64ndiswrapper v.1.47Had to open an EXE file so I used a windows boxAbout an hour of headacheOkay, let me start this by saying that the MAIN reason I am posting this at all is that I couldn't personally find much help on the matter for myself. It got so bad that I went out and bought ...

Ubuntu is reporting color setting at 16.7M but its either 256 or 65K.

So, I just got the rev 185 drivers to function with my fresh install of 9.10 and a NVidia Gefore 9500GT vid card but the colors don't look right.All graphical acceleration looks fine (Compiz runs quick and clean) and the NVidia app is reporting 16.7M colors but when I look at pictures or browse the ...

Ubuntu Problems with linuxtv drivers and Hauppauge WinTV HVR-1800

I recently bought a Hauppauge WinTV HVR-1800 for use in a Gutsy (7.10 x86) MythTV setup. According to http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1800 the digital (but not analog) capabilities of this card are already supported by the linuxtv.org drivers, but since I'm using kernel 2.6 ...

WinTv drivers for suse

I have a Hauppauge wintv usb in one computer and pci wintv in the other i really need drivers for these. Please help me ...

WINTV 1600 installed and ubuntu cant load nividia drivers

I just got Haupauge WINTV 1600 PCI and now whun ubuntu loads it wont recognize my nvidia 8600, if I take the wintv card out there is no problem, is ubuntu thinking the wintv card is the video card and not loading the drivers for the nvidia 8600 card?Or has the happened to anybody else? Does anybody ...

Ubuntu 3D drivers for Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

well i reascently did a full install (from the CD) of ubuntu jaunty alpha to my handy flash drivve, now formatted with ext2. and when i had the kubuntu intrepid iso on my drive, i could have 3D effects on my libraries computer (judged by glxgears). but now that i have ubuntu jaunty, i dont have 3D d ...

Ubuntu BCM4312 (rev 01) doesn't connect at start up (drivers installed)

I have a BCM4312 rev 01 on a Dell Inspiron 1525. I used this thread: http://ubuntuforums.org/showthread.php?t=870086&highlight=bcm4312 to set it up and it works, but only if I go to System>Administration>Hardware Drivers and click to enable the BCM driver. However, it never actually says t ...

Ubuntu drivers for bcm4312(rev 01) 802.11 b/g for tx2500z

08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)these are my network driversmy kernel version:Linux showri-laptop 2.6.24-21-generic #1 SMP Mon Aug 25 16:57:51 UTC 2008 x86_64 GNU/LinuxI do not know where i am going wrong.I get the same results as others but my wireless sti ...

Ubuntu Has anyone Installed drivers for Broadcom 4312(rev 01) 802.11 b/g drivers

I have Tx2500z laptop with broadcom wireless 4312(rev 01) 802.11 b/g.I have been trying to install drivers for it but unable to do so.Can anyone help me out.WARNING: you should run this program as super-user.*-network description: Wireless interfaceproduct: BCM4312 802.11b/gvendor: Broadcom Corporat ...

Ubuntu Linux drivers for Hauppage WinTV PVR 350

Are there any suitable drivers for the Hauppage WinTV PVR 350 card? Hauppage does not have a Linux driver, but they claim that there are Linux drivers for it. Where? ...

Ubuntu Hauppauge WinTV HVR-1600 NTSC/ATSC Combo

Here is what I spotted on the companies page about this delima we have:"Linux support for the WinTV-HVR-1600Linux support for the WinTV-HVR-1600 is in process. When the WinTV-HVR-1600 is added to the growing list of over 30 supported Hauppauge products with Linux open source drivers, an entry w ...

Ubuntu Wintv-HVR-1950

I just bought a WinTV-HVR-1950. I looked it up on linuxtv and it told me it works with it. I complied the V4L drivers and extracted the firmware from the driver CD that came with the Unit. Now I've been trying to get this to work in mythtv and I got as far as getting it to be probe and showing up in ...

Ubuntu WinTV-PVR-pci no sound issue easily fixed

WinTV-PVR-pci no sound issue solved.masq-man from Feb 2007 gave the last clues. Thanks :PFirst, for the WinTV-PVR-pci TV tuner and FM tuner cards with no apparent sound but a picture, you'll wouldn't need to change a ton of settings. Take the pvrpcidrv15_20045.exe and extract the hcwamc.rbf driver f ...

Ubuntu How I got my Hauppauge WinTV USB2 working

(check out Rafael Gattinger's excellent instructions at http://www.unet.univie.ac.at/~a9826090/en/projects/linux/hardware/wintv-usb2/ (http://www.unet.univie.ac.at/%7Ea9826090/en/projects/linux/hardware/wintv-usb2/))****I noticed that this weblink is no longer available so I will try to give you the ...

Ubuntu Installing a Hauppauge WinTV-PVR 150 (no video)

I got a Hauppauge WinTV-PVR 150 for Chirstmas, so that I could play my PS2 on the PC and not hog up the TV. The only problem is I'm having trouble getting it to work.Here's the steps I've followed so far:1) Remove my old KWorld video capture card (which doesn't work with linux)2) Place the Hauppauge ...

Ubuntu Hauppage WinTV pvr 150 no /dev/video0

Ok I know this might seem redundant, I wouldn't call myself a noob with linux. I followed a ton of guides on how to install mythTV, tvTime, etc. I have in all about 3 different apps, and vlc which is pretty much the best thing since sliced bread. Problem is this. I have gone many tutorials guides wi ...

Ubuntu WinTV usb2: no signal in tvtime

When I attempt to view the output of my WinTV usb2 external tuner with tvtime, all I see is a blue screen with the words 'no signal'. I've tested the tuner on Windows and it works fine there.Both dmesg and lsmod seem to indicate that the appropriate drivers are loaded and running, and the text in th ...

Need drivers for PT800CE-A Rev 1.0 sys board

I have searched to no avail for the MB drivers. It is the VT8237 chipset. Anyone have these drivers? ...

Ubuntu Adaptec Gamebridge AVC 1410/510 NTSC REV-B

I have just converted from Windows to Ubuntu and I am looking for help in installing the Adaptec Gamebridge AVC 1410/510 to my system. Does anyone know of any drivers for it? ...

Ubuntu Configuring WEP with DWL-G122 rev C1, Ralink RT73 drivers.

I've recently configured my laptop to use the DWL-G122 rev C1 USB wireless adapter. My experiences in setting this device up are recorded in this wiki page:https://wiki.ubuntu.com/WifiDocs/Driver/RalinkRT73I am now trying to configure the device to use WEP encryption, but I'm not having much luck. F ...

Ubuntu Video drivers for saa716x and lgdt33xx?

I read at v4l that kernel 2.6.38 will have updated video drivers. My uname -r shows 2.6.35.When will .38 be introduced into Ubuntu? Weeks? Months? Years?I have an AverMedia Duet (A188) pci-e card. It is only digital-broadcast (or clear QAM), no NTSC. lspci shows it as:03:00.0 Multimedia controller: ...

Ubuntu Hauppauge WinTV PVR-150 How-To

This is a little write up on my experience getting a Hauppage PVR150 that I bought off of Craigslist up and running. I know this is old hat but I still fumbled a bit and figured this still might help somebody.The little guy has the family of Conexant chips that has a driver developed for it over at ...

Ubuntu hauppauge wintv pvr2 not working

im a newbie to ubuntu and just changed my install from ms xp to ubuntu, im having problem get my tv tuner to work, it is a hauppauge wintv pvr2 i have done following to configure it, enabled the driver in the kernel ( recompile) downloaded and installed the firmware from ivtv my dmesg looks ok [ 10. ...

Ubuntu WinTV-HVR-1500 TV Tuner Woes

WinTV-HVR-1500 is driving me crazy .... any help would be greatly appreciated so I dont go back to windows ARGHHHHnothing I do can seem to get my tuner card to show anythinghere's my dmesgcx23885 driver version 0.0.2 loaded[ 8.602182] cx23885 0000:04:00.0: enabling device (0000 -> 0002)[ 8.602191 ...

Ubuntu WinTV NOVA DVB-S2 PCI Card

I'm now at the end of day five of trying to get TV sorted on Kubuntu - still good fun though!The Environment: Kubuntu-64 2.6.27-11-generic, WinTV NOVA HD DVB-S2 PCI, ASUS Athena, Intel Q6600, 8GBBy following this thread http://ubuntuforums.org/showthread.php?p=6391900 earlier, I'd managed to get my ...

Ubuntu ENLTV-FM rev 3.0 (saa7130, saa7134)

1. HistoryI realize there are not many threads about this TV card so I start this one.Warning: This card is totally different from ENLTV-FM-2.This thread was created: 2009-January-17This thread was updated: 2009-April-25This thread was updated: 2010-April-192. Encore ENLTV-FM: PCI TV Tuner Adaper wi ...

Ubuntu TV card Problems... atsc channel scan yields no results with Hauppauge WinTV-HVR 1800

I have been at this for about a week now and I can't seem to get past the point where you do the scan for the channel frequencies. I have tried running the scan using 'scan' , kaffeine, and tvtime, and and get no static or channels. I have also upgrade the v4l packs and nothing came of it ...Here is ...

Ubuntu trying to add a Hauppauge WinTV-HVR1250

I bought a 2nd tuner card...Hauppauge WinTV-HVR1250 to try and get the over the air HD channels. As you can see from the output below it seems that the computer sees both the new and old card. I've tried some different things I found from searching but I can't get mplayer or vlc to play it much less ...