Ubuntu NVR(/dev/video1) Error: Failed to set audio eno: Invalid argument (22) VIDIOCGMBU

This error occurs when I attempt to record from Card 4 (composite in /dev/vidoe1). /dev/video1 is from a usb Hauppauge PVR USB2 which otherwise loads OK. I know that because you can do cat /dev/video1 > test.mpg then play the file test.mpg on MPlayer or look at the /dev/video1 output directly fro ...

RPM error: cannot open Depends index using db1 - Invalid argument (22)

Howdy,I recently upgraded from linux kernel 2.2.17 to 2.2.19 on a redhat 6.2 machine. The upgrade went fine, but after I rebooted with the new kernel (which went fine) my RPM appears to be broken, whenever I try to install/update something with rpm I (sometimes) get the following error:cannot open D ...

mount: mounting /dev/loop0 on /mount_dir failed: Invalid argument

I am getting error while mounting loop dev over mount_dir.my step as follows:#mkdir /mount_dir#mount -o loop /mount_dirmount: mounting /dev/loop0 on /mount_dir failed: Invalid argument ...

device-mapper: reload ioctl failed: Invalid argument

I have got a strange error while working through the project....I am using dmsetup to make flash drive as cache to hard disk by thebelow command/dev/sdb1 --> flash drive/dev/sda1 ---> hard disk>>echo start_offset_disk end_offset_disk cache /dev/dsa1 /dev/sdb1 | dmsetup create fooI am get ...

Ubuntu 9.10 Mounting error: mounting dev/disk...on root failed: Invalid argument

I am currently dual booting Windows 7 and Ubuntu 9.10 64 bit on a HP laptop. However for some reason when I woke up this morning the Linux partition failed to boot. The computer can successfully get to the Grub 2 (1.97~beta) boot screen and from there it can successfully boot into Windows 7 along wi ...

Ubuntu Compro Videomate H900: "v4l2: ioctl request buffers failed: Invalid argument" error

I have got TV tuner Compro Videomate H900. When I installed the MPlayer and ran with parametersmplayer tv:// -tv driver=v4l2:device=/dev/video0I got the following error "v4l2: ioctl request buffers failed: Invalid argument"Full message mplayer tv:// -tv driver=v4l2:device=/dev/video0MPlaye ...

Ubuntu alsamixer: function snd_mixer_load failed: Invalid argument

alsamixer: function snd_mixer_load failed: Invalid argumentThis is the error i get when trying to run alsamixerI've tried running through the Comprehensive Sound Problem solution guide and have even built alsa from source and i'm still getting this problem whenever i run alsamixer.The reason im need ...

Ubuntu 'eth0' failed: Invalid argument

Sorry if this is a simple question but I've installed linux and when I plug my laptop into my D-link internet router nothing seems to happen. When I try sudo mii-tool eth0i get 'eth0' failed: Invalid argumentAlso when do route -nnothing comes back on the IP routing table.The router is connecting ok ...

Ubuntu HDIO_GETGEO failed: Invalid argument (DMA)

all i relly have become stuck on somthing!!! Im trying to enable DMA on both my CD/RW drive and DVD/RW drive but im coming to a dead end with all ive tried..I have tried quite a few things and just keep getting the same problem.../dev/hdd:IO_support = 0 (default 16-bit)unmaskirq = 0 (off)using_dma = ...

Ubuntu swapon failed: Invalid argument

I'm trying to swap to file on my sdcard, but I'm getting this errorswapon failed: Invalid argumentHere is the sequence to produce the errorroot@eee:/media/sd1# dd if=/dev/zero of=/media/sd1/hibernate.img bs=1024k count=200200+0 records in200+0 records out209715200 bytes (210 MB) copied, 18.7177 s, 1 ...

Ubuntu (WW) intel(0): first get vblank counter failed: Invalid argument

Hi. I'm using Ubuntu 11.04 with Unity on my laptop. It's great but I'm suffering of the infamous "close the laptop lid" freeze.Basically, when I close the laptop lid, I have to pray that it didn't freeze when I open it up again, else I'll only be able to move the mouse and be forced to ctr ...

Ubuntu mounting root on host failed. invalid argument

I'm running 7.1 installed via wubi and encountered problem after install of something like 215 recommended updates. There is an alert message just prior to dropping to shell when I boot in recover mode that says /host/ubuntu/disk/host.root does not exit. It appears to me that the problem is that the ...

Ubuntu (initramfs) mounting /dev/sdb Invalid argument problem

I'm using Ubuntu 10.10 on a 4 gb usb and I used the Universal USB Installer to make it and it worked fine for atleast 3 weeks now but randomly I turned on my machine and tried to boot Ubuntu and it showed up with Busybox saying I could type help to find all the commands i could use and under that it ...

Ubuntu growisofs 'Invalid argument' error

New to Linux, first time posting. Running Ubuntu 8.04 on a Dell Studio laptop. Burned one data DVD-RW fine using gnomebaker, then haven't been able to successfully burn another. Tried K3b as well. Been researching it, and have isolated the problem to growisofs. Running it gives this error:growisofs ...

Ubuntu 10.04 upgrade will not boot "invalid argument" error

I did the online upgrade from 9.10 to 10.04, using 64 bit. I was forced to as the 2 solutions to my incedibly slow internet lookups both required new package installs, both of which failed, so hoped it was sorted out in 10.04 TLS. It all went to plan until it tried to reboot. I get this:mount: mount ...

Ubuntu live cd encrypted mount invalid argument

I am in the process of making modifications to a live cd to support mounting encrypted persistent files. I have the code for losetup to map loopback file and cryptsetup to create the mapping to /dev/mapper/test. But the mount of the device fails. The directory/file names will change, but the basic m ...

Ubuntu SIOCSIFFLAGS: Invalid argument - Can't share internet

When I was with Ubuntu 7.10 , everything was good and I could share my internet with my other PC which runs on Windows XP .Now I updated to Ubuntu 8.04 and I have problem with my second lan card . I have 2 networks card on my computer - the first to connect to the internet , the second to share the ...

Ubuntu Can't burn DVD anymore: growisofs: Invalid argument

I'm not burning DVD very often, but it used to work perfectly. But today I tried to make a backup with k3b, and I got this error coming from growisofsgrowisofs-----------------------Executing 'builtin_dd if=/dev/fd/0 of=/dev/scd1 obs=32k seek=0'/dev/scd1: "Current Write Speed" is 2.0x1352K ...

Ubuntu lseek invalid argument error using pvdisplay command with raid 5

I have setup software raid5 with 3 active devices, 1 spare.Here's the output of mdadm --detail:matthew@mammatus:~$ sudo mdadm --detail /dev/md0/dev/md0:Version : 00.90.01Creation Time : Thu Apr 27 00:56:00 2006Raid Level : raid5Array Size : 586099200 (558.95 GiB 600.17 GB)Device Size : 293049600 (27 ...

Ubuntu Rhythmbox invalid argument import error

Has anyone experienced this problem?Ubuntu 9.04, 64-bit, Rhythmbox import error:"pa_stream_set_sink_input_volume() failed: invalid argument".I am getting this error on random FLAC files when trying to play an entire album. For example, a 12-song album will have one or two songs that can't ...

Ubuntu Invalid Argument DVB API

everyone. I'm pretty new to all this programming stuff and in fact have only started to make some software that I can't seem to find the equivalent of so please forgive my ignorance if I have missed anything. Also considering the error I am getting, I am hoping that I am just making a newbie syntax ...

fdisk warning: Re-reading the partition table failed with error 22: Invalid argument.

I am preparing sdcard as my boot device to some another platform. For that I made a partition using fdisk.sudo fdisk /dev/sdd1Command (m for help): oBuilding a new DOS disklabel with disk identifier 0x3ea88d86.Changes will remain in memory only, until you decide to write them.After that, of course, ...

Ubuntu Problem with kismet "FATAL: channel get ioctl failed 22:Invalid argument"

I installed kismet but i couldn't run it. Also google couldn't help me more. Here is my problem:myuser@mypc:~$ sudo kismetLaunching kismet_server: //usr/bin/kismet_serverSuid priv-dropping disabled. This may not be secure.No specific sources given to be enabled, all will be enabled.Non-RFMon VAPs wi ...

IBM AIX RISC System/6000 Error: 22: Invalid argument

PRODDb 9.2.0.8AIX 5.2Suddenly database crashed. What I found in alert log file and trace file find below.I started database it started normally but it took much time to start. Suggest me why it occurred and what I need to change so that I could not face again it.Alert log file:ARC1: Completed archiv ...

fopen - failed to open stream, invalid argument

I've been going nuts over the following piece of code for the past few hours,what it does (or rather is supposed to do) is;open a textfile containing links,break it down into variables,and then loop those variables using them to open two other files that also contain various information...now the fi ...

"Failed in listen(): Invalid Argument" Error Openi

I am using Mandrake 10 and whenever I execute apps from a terminal session I get the following error: failed in listen(): Invalid argument . I get the message twice in the terminal and then the app opens. However, whenever I try to use the app the same message gets displayed in the terminal window r ...

Ubuntu RAID won't assemble: failed to add /dev/sda to /dev/md0: Invalid argument

My hard drives kept dropping out of the raid array, so I finally identified the problem as a bad sata cable. I redid the wires and now when I try to assemble I get this:mdadm -v --assemble --scan /dev/md0mdadm: looking for devices for /dev/md0mdadm: no recogniseable superblock on /dev/sde4mdadm: /de ...

Ubuntu ZoneMinder ZMU: Error, failed to get channel 0 attributes: Invalid argument

I have a Sweex USB webcam which I am trying to setup with ZoneMinder, however I cannot find the settings for it, and when I run:$ zmu -d /dev/video0 -q -vI get:Error, failed to get channel 0 attributes: Invalid argumentthe device shows up as:ID 0ac8:3343 Z-Star Microelectronics Corp. Sirius USB 2.0 ...

Ubuntu ""Failed to connect stream: Invalid argument"

Im a newbie to ubuntu and need helpPROB:I tried to customize my desktop using GDM themes and i somehow managed to make a mockery out of it...i installed the Awn manager...and now each time i try to play an audio file it gives an error "Failed to connect stream: Invalid argument"...i get th ...

Oracle Problem with "cpio" - cannot chown() - errno 22 - invalid argument

I am trying to unpack the Oracle 9i installation files on Solaris 9 when I try to do the "cpio" on a mounted USB hard drive.If I copy the 3 .gz files to the system hard drive, gunzip and cpio work file.If I copy the 3 .gz files to a directory on my mounted (/mnt/Oracle9iDB) USB hard drive, I can gun ...

Oracle Reg: warn] (22)Invalid argument: setsockopt: (TCP_NODELAY)

I am getting the error msg below, in the file $ORACLE_HOME/Apache/Apache/logs/error_logwarn] (22)Invalid argument: setsockopt: (TCP_NODELAY) ...

Ubuntu An error occurred: Invalid argument [Errno 22] while installing inside Windows. Ubunt

WinXP: While installing Ubuntu 9.04 Jaunty Jackalope Release i386 from CD and choosing to install it "inside Windows" I get An error occurred: Invalid argument. For more information, please see the log file:The error in the log file seems to be ERROR TaskList: [Errno 22] Invalid argument; ...

Ubuntu VIDIOC_S_FMT error 22, Invalid argument

I have been trying to use Meboo Messenger for Video chatting from my Ubuntu 10.10 64bit, Kernel 2.6.35, Shockwave Flash 10.3 d162 system with a Logiteck Quickcam Express V-UW21. Because Meboo uses flash I installed Flashcam 1.4.5 since Meboo was not detecting the webcam (cheese detected it fine). Ac ...

Ubuntu Failed to open stream: Invalid argument error :(

I'm getting this "Failed to open stream: Invalid argument" error when i try and play any format of music file. I have the restricted extras for my mp3's etc, but OGG not working either.Anyone have any ideas?ThanxTim ...

Ubuntu xsane -- Failed to start scanner: Invalid argument.

What do I need to read to learn how to get my Epson Perfection 600 scanner working on 8.04? This machine used to run SuSE 10.0. I had this scsi scanner working on that distro.I powered up the scanner. When I ran xsane I got the error message telling me that it couldn't find a scanner. (I expected th ...

Ubuntu xsane "Failed to start scanner: Invalid argument"

I've got Ubuntu 9.10, pangolin. I used to be able to scan without any problems. I don't think I ever did anything special to make things work.A few weeks after a reinstall I wanted to scan something so I opened up Xsane.Xsane will scan for devices and then open. It doesn't appear to actually find a ...

Ubuntu RAID won't assemble: failed to add /dev/sda to /dev/md0: Invalid argument

My hard drives kept dropping out of the raid array, so I finally identified the problem as a bad sata cable. I redid the wires and now when I try to assemble I get this:mdadm -v --assemble --scan /dev/md0mdadm: looking for devices for /dev/md0mdadm: no recogniseable superblock on /dev/sde4mdadm: /de ...

Ubuntu Canon Lide35 Failed to start scaner:invalid argument

I was waiting the new version of ubuntu Dapper Drake with genesys 1.0.17.With Dapper find the scaner but when I want start to scan find this problem:Failed to start scaner:invalid argument :( Anybody with Lide35 /50 can help me?TIA ...

Ubuntu Error "set failed on device wlan0 ; invalid argument"

So I spent an hr and a half trying to set up the wireless myself, my wired connection works fine but i can't seem to get the wireless to work =/im using a linksys wmp11, i set it up using ndiswrapper and it shows up in iwconfig and ndiswrapper -l shows it as installed and working fine, if i type iwl ...

Ubuntu Solved SET failed on device xxx ; Invalid argument

I am posting this, because I have found numerous threads with questions about the error messages when starting up the wlan interface and no answer that has really solved my problem.What happend was:Whenver I tried to start my wireless network with sudo ifup xxxI would get the following error message ...

Ubuntu gdb issue: &"warning: GDB: Failed to set controlling terminal: Invalid argument\n"

I have tried Code::Blocks and the qtcreator. With both I can compile programs, but the debugger which apperantly is gdb for both doesn't work. I get the message:p, li { white-space: pre-wrap; } &"warning: GDB: Failed to set controlling terminal: Invalid argument\n"Does anybody here kno ...

Ubuntu Working on.../sbin/mount.vboxsf: mounting failed with the error: Invalid argument

Try mounting hard drive = /sbin/mount.vboxsf: mounting failed with the error: Invalid argumentComand was equal to = sudo mount -t vboxsf E_DRIVE /home/marcoftheknightE_DRIVE = Shared folder permanent in the VBox settings OracleRecent attempts to auto mount the Hard drive is th emost likely the cause ...

Invalid argument: getsockname

Every time I try and execute a simple opening of a remote file:<? $fcontents = file ('http://www.php.net/'); ?>I get an alert box saying "The attempt to load 'Accessing URL http://blah.com/test.php' failed"My apache error log file says [Mon Jan 28 08:27:55 2002] [error] (22)Invalid a ...

Ubuntu Getting a weird "KDSETKEYCODE: Invalid argument" error.

I get this in /var/log/boot:Sat Oct 22 19:59:50 2005: KDSETKEYCODE: Invalid argumentSat Oct 22 19:59:50 2005: failed to set scancode 5d to keycode 256Sat Oct 22 19:59:50 2005: KDSETKEYCODE: Invalid argumentSat Oct 22 19:59:50 2005: failed to set scancode aa to keycode 256Sat Oct 22 19:59:50 2005: KD ...

Ubuntu invalid argument opening scanner

Hello, I have a problem opening my Epson 3490 scanner with XSane, I get the following error message:Failed to open device 'snapscan:libusb:003:006':Invalid argumentI've read this thread http://ubuntuforums.org/showthread.php?t=1099482&highlight=xsane but didn't really understand. Any help apprec ...

sendmsg : Invalid Argument

I m new to Linux and socket programming in IPv6,please check out the code. I know the error which is w.r.t Memory allocation. The code snippet is:int main(){sockfd = socket(PF_INET6,SOCK_RAW,IPPROTO_RAW);struct sockaddr_in6 sin;********// Inserted the IPv6 address along with the other options in the ...

"Invalid Argument" while trying to use Import Text Wizard

I'm trying to create some import specifications so that I can automate an import process. There are four text files that I need to import, each to its own table.The first two are really small, and I have the required specs for them. The other two are somewhat larger (in terms of file size and column ...

Ubuntu ghc6 install trouble: hGetContents: invalid argument (invalid UTF-8 byte sequence)

Hi, I'm having some trouble installing both ghc6 and haskell-platform. I figure I'll work on getting ghc6 installed first, then worry about haskell-platform...Here's what seems to be the relevant error that comes up when I try to (apt-get|aptitude) install ghc6:A package failed to install. Trying to ...

Ubuntu udev_monitor_new_from_netlink: error getting socket: Invalid Argument

http://superuser.com/questions/142165/ubuntu-upgrade-to-10-04-general-error-mounting-filesystems/142178had this exact bug, ended up doing a reinstall of the LUCID OS to fix.Parent's box was upgraded from Hardy to Lucid and it worked until yesterday.In future, does anyone know how to fix it?ureadahea ...

Ubuntu inode invalid argument - removing file

I am trying to remove a file off of my external that got corrupted. The file is only corrupted not the entire drive. I failed to remove it with the "rm -f" command. Then through some searching I stumbled upon this thread > http://ubuntuforums.org/showthread.php?t=456714 (http://http://u ...