I have a HP DV6000 with Natty. I picked this for next to nothing and the HDD was wiped so I decided I wanted to mess around with Ubuntu a little bit. I have everything working on this machine except the wireless. It has an onboard Broadcom, but after hours beyond hours of trying to get that configur ...
I need help installing a usb wireless adapter onto a Natty system.Details:Wireless device is a Netgear WNA1000M-100ENS new from box with mini-CD that contains windows driversComputer: HP Compaq dc7600 (minitower) that is connected to internet through cable until I get the wireless working.Environmen ...
The heart of the problem:ndiswrapper seems to work okay, the drivers seem alright. But iwconfig cannot change essid or key when mode=Managed.I've combed through more than a dozen threads on here and LinuxQuestions, following every piece of advice that made sense. So many promising leads, but still n ...
I followed the instructions in WifiDocsDriverNdiswrapper and used the Netgear wn511b.inf/sys files from a Windows installation.Before selecting the network to be connected with, ifconfig gives:wlan0: link encap:Ethernet HWaddr 00:14:6c:f3:e5:2aUP BROADCAST MULTICAST MTU:1500 Metric:1RX packets :0 er ...
I followed the instructions here to get nidiswrapper working working with a Netgear MA521:http://www.ubuntulinux.org/support/documentation/howto/ndiswrapperand all seemed to be well until i tried to connect.After using "sudo modprobe ndiswrapper", I tried to configure the connection using ...
Hi, this is a new snafu that developed from a previous one that was already solved (thanks, Chili555) where I was instructed how to install a usb wireless adapter (Netgear WNA1000M-100ENS new from box) onto a Natty (11.04) desktop system.Here is my new snafu: The wireless access on the natty bootup ...
hi, I have a netgear wg111 usb dongle. It's the one that is v1 even though it says v2 on it.So I installed ndiswrapper and then installed the drivers from netgear to both Wine and a windows virtual machine trying to get an inf file.There is only a setup exe for the download. I also tried extracting ...
i have read so many posts about getting inf files from exe's but i just cannot seem to do it....i have unzip installed as well as cabextract installed.the file is called wg111t_2_0_setup.exe and it is saved on my desktopcould anyone help me, how can i get the inf, im afraid i am still not good with ...
i have read so many posts about getting inf files from exe's but i just cannot seem to do it....i have unzip installed as well as cabextract installed.the file is called wg111t_2_0_setup.exe and it is saved on my desktopcould anyone help me, how can i get the inf, im afraid i am still not good with ...
i have read so many posts about getting inf files from exe's but i just cannot seem to do it....i have unzip installed as well as cabextract installed.the file is called wg111t_2_0_setup.exe and it is saved on my desktopcould anyone help me, how can i get the inf, im afraid i am still not good with ...
After installing Vector Linux 5 standard beta 2, I now require my PCMCIA Netgear WG511 v2 (I think, made in Taiwan) to work, as it is my only way to connect the internet.Using Ndiswrapper, I did the followingndiswrapper -i /home/<my user name>/netwg511.infHowever, when checking to see if it wo ...
im new to linux and need help setting up my netgear wg511v2 on my laptop. I have already installed ndiswrapper. The problem is when i load the drivers an check them it shows invalid driver.I have the orignal netgear cd with the drivers on it and just rick clicked an copied the .sys and .inf files to ...
I am completely new to Linux. I now have Ubuntu 10.10 installed on my computer as a dual boot system with Windows. Unfortunately I can't get my Netgear WNA1100 USB wirless adapter to work. I have unsuccessfully tried some suggestions but I am hoping for some very simple step by step instructions as ...
I haven't gotten any reply's over at the Netgear forums so I thought I'd try here. Maybe someone else is having this problem.I have a dual boot system running Fedora 12 and WindowsXP. I recently bought a Netgear wireless USB model WNDA3100v2 and immediately got the newest drivers from the netgear si ...
i am now trying to get my network over ndiswrapper goingnow i need the .inf files of my cardbut i can only find .sys files in the c:/windows/system32/driverswould those work too???or where can i get the .infit is a netgear wg311t cardthx ...
I understand that to use a wireless USB not support by Ubuntu 8.04 use something called NDISwrapper and use the "windows driver"(*.inf file) provided by manufacturer. All well and good, but those nice people at NETGEAR provide a Self Installing wizard. Can`t find this (*.inf) file after it ...
all. Have loaded new Ubuntu 8.04, looks good.Only problem i have is with netgear wireless pci card wg311v3.Loaded ndiswrapper common, Utilities and finally ndisgtk.Followed Ubuntu 804 documentation from this site and opened windows wireless driver,then followed these steps:1/ selected install new dr ...
I'm dual-booting between Windows 7 and Ubuntu 9.10. My problem is when I try to install my NetGear WN111 USB Apter via ndisgtk and it doesn't work. I tried to use the oem13.inf (ignore the 13, Windows 7 was stupid with me) file. First of all, I have checked under Windows 7's Device Manger for what i ...
lsusb gives:Bus 001 Device 002: ID 0846:9040 NetGear, Inc.So I think it's correctly recognizing it, but for some reason it won't identify it as a wireless USB NIC. I'm trying to install without a wired connection (several rooms away from a wire, and this is an old tower), so any help there would be ...
I am currently following this walk-through https://help.ubuntu.com/community/WifiDocs/Device/Netgear_WG311_v3My problem :"Navigate to to the location of the .inf file, and then install it:"I have located the .inf.However, I haven't a clue on how to install it.Help? ...
Lucid Lynx 10.04Laptop Compaq Evo N620C.lsusb output:Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 001 Device 002: ID 0846:9030 NetGear, Inc. Bus 001 Device ...
I can say for sure that NDISWrapper will handle the NETGEAR WNA1100I wrote this for anyone looking to get it working. There are variations in how it runs on each computer but I have gotten it to run quite nicely on all three plus my desktop! I know some people can't get it to work I can't promis thi ...
I am new at ubuntu. I just installed it on my laptop and I can't get the external wireless card to work. I checked out various forums, where people told me to use the NDISwrapper. While I was following the instructions, it said to type in the folowing code to find the driver chipset. sudo lspci -n I ...
I made a clean install of Hardy Heron on my Dell Inspiron 5100 laptop.I had my Netgear WG111T USB wireless card working when using Gutsy on the same machine. Using the same setup, I cannot get the card to work anymore.Using the updated drivers, ndiswrapper shows that the drivers are installed and th ...
Hi, I am trying to get my NETGEAR WNDA3100 wireless USB adapter to work on Ubuntu 10.10 amd64.I was able to install the ndisgtk package and use that to install the bcmwlhigh6.inf driver. I got the .inf file from my Windows 7 amd64 install where the adapter is working.I used "ndiswrapper -l ...
I have a problem with a Netgear WNA1100 USB Wireless DeviceLucid Lynx 10.04Laptop Compaq Evo N620C.lsusb output:Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubBu ...
Trying to install a NETGEAR WG311 network adaptor using this method:https://help.ubuntu.com/community/WifiDocs/Device/Netgear_WG311_v3I have Ubuntu 10.04 and ive only just installed it so im slightly new to this. I have got to the 'Installing Your Driver' Section however I have the .INF files on my ...
all, I'm in serious need of some help here. I've always used windows and really, really, want to get into linux, Ubuntu seemed like the best distro to learn on, so I'm giving it a try. Problem is I can't get my wireless adapter to work. Please help me, I've tried, trial and error, for 3 days now ](* ...
I recently bought the above PCMCIA because it was the only wireless card available in a popular electronics store here in the UK. It took me a long time to get it installed and I saw a large number of other people asking about this card with no real answer. I was installing on Jaunty Server and ther ...
I just recently moved to a new apartment and got a new wireless setup. My roommate has the router on his computer and I have the wireless adapter on mine. I tried to connect to the internet in Ubuntu and found that I could not. I tried using ndiswrapper and a bunch of .inf and .sys files to force th ...
Please help: Just downloaded Ubuntu 10.04 and installed a Netgear wg311 v3 wireless card. I have been successful (I think) in downloading the ndiswrapper. I have not been able to download the driver however, even though I have tried multiple sites. Here is an error reading I received when following ...
I am an absolute beginner to Ubuntu and I need help setting up my wireless; I wrote more then I probably needed to.My wireless card which came with the computer is "Netgear Wg311v3 802.11g Wireless PCI Adapter"I am running Ubuntu on dual boot with a Gateway Windows XP computer.My version o ...
Well I've been struggling to set up my Netgear wn111v2 wireless USB card for days and I believe I am close to finishing; under system>administrator> I can find 'windows wireless drivers,' and I put in two different drivers that I downloaded from another post, one of them being bean197 and anot ...
Toshiba Satellite pro 4600 laptop with Dual boot XP Pro-Karmic Ubuntu. Wireless N is fine under Windows with Netgear WN-511TA PCMCIA card. I recently used the graphical method to install ndiswrapper and the Windows driver into Karmic Ubuntu. The window shows the hardware is present (NMW14X: yes), im ...
Well after days of combing the internet and beating my head against the wall, I finally got my Netgear WNDA 3100 v2 wireless adapter working on my old Dell PC running Ubuntu 9.10 (Karmic Koala).I am not highly technical, and am fairly new to linux, so this was a real challenge for me, so this is a k ...
Guys I am a new ubuntu user and I am trying for the life of me to get a netgear wn111 wireless usb working. Ive extracted over 10 times from the installation CD and I just cant seem to find the following files.wn111.infwn111.sysnetmw245.inf I read one thread about someone getting this particular wir ...
daylon@daylon-ubuntu:~$ lsusbBus 001 Device 003: ID 0846:9001 NetGear, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubBus 002 Device 002: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse 6000 RecieverBus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubdaylon@daylon-ubu ...
although it has been slow going I am making progress on installing a netgearcard in unbunturight now I am trying to extract the netgear file ..../home/god/Desktop/wg311_1_3.zipbut instead of getting the files i expect and already have in windwos i get thefollowing /home/god/Desktop/WG311_v30043_AdvS ...
so heres the problem, I can not get my Netgear wg511v2 PCI to workI open up windows wireless drivers and the CD is inI open autorun.inf (only .inf file on cd)I click install and I get "error while installing"I have ndisgtk, ndiscommon,ndis utls 1.9INFO:1. Netgear Wg511v2 PCI card (Made in ...
Help please with netgear wg111t....I've installed the drivers athfmwdl.inf and netwg11t.inf using ndiswrapper. the device shows up as present in ndiswrapper. However, no wireless connection shows up in network admin. here's the output of of lsusb and iwconfig....ivan@ivan-desktop:~$ iwconfiglo no wi ...
all, I have a Xubuntu 8.04 LTS version installed on an ASUS laptop and I was trying to install a wireless adapter WG111v3 from NETGEAR to work with my router DG834G. I read tens of tutorials and guides and I think I'm on the brink of coping with it, but still I'm not connecting. The summary is the f ...
I request someone to help me to sort out the issue of wireless configuration on my computer.My operating system is Ubuntu 8.04, Modem is HUAWEI Quidway WA1003A, and Wireless adapter is NETGEAR WG311.I tried configuring the connection using help available on web page http://www.cyberciti.biz/faq/marv ...
I currently am running Intrepid 64-bit and am having problems with getting my Netgear wireless adapter to install correctly. I have ndiswrapper and the GTK front end and tried to install the drivers that i had extracted from my last 64-bit vista install. and it tells me that the device could not be ...
I'm running 9.04, and I am trying to get a Netgear wg111t working with ndiswrapper, and I've been having a ton of problems. I did manage to get ndiswrapper to use the .inf file, however I still can't use the device. I try to use "ndiswrapper -l", and the program hangs indefinitely. I also ...
I was asked by my mother's boyfriend to redesign a website for the apartments he manages, he set me up in a room and tossed me a Netgear WG111v2 and a sheet of paper with a username, password, etc. After hooking my computer up (Ubuntu Jaunty distro/Gnome desktop) and plugging the dongle in nothing h ...
Greetings,I've been trying for the past two days now to get my Netgear WG111T 108 Mbps Wireless USB 2.0 Adapter to work on my Mini ITX I built a few days ago. I've been researching the forums and googling all day trying to find a solution to getting this thing to load up and I've run out of ideas. I ...
I had no problems using this specific wireless adapter for some time now on 8.10. I initially installed the driver via ndiswrapper and it is still present. When the adapter is plugged in the icon that displays a pending connection just keeps rotating in the upper right corner and never connects (if ...
I'm using the following tutorial" This is a complete how to on installing and setting up the Netgear WPN111 wireless device in Ubuntu Gutsy Gibbon.1. Download the two attachments (WIndows drivers and ndiswrapper)2. Install build-essential (Needed for compiling ndiswrapper)Code:sudo apt-get inst ...
After reading through these forums it seems like I have experienced every set of problems mentioned with this particular card: driver not working, can't connect to WPA networks, etc. What finally did the trick for me was not worrying about Netgear's driver. I found a driver to match the chipset, and ...
I've been reading up on the various methods of using ndiswrapper and ubuntu. All that seems to be fine, however I am unfortunately very stuck. I don't have a driver installation disk, and Netgear only appears to pump out .exe files. I attempted to use cabextract on the .exe for the driver installer, ...