Oracle IMPDP ignore=y

I am importing table A records into Table BTable A haiving 1000 records.Table B having 100 records.I want to import through IMPDPWhat is option in IMPDP which is equivalant to IGNORE= Y in IMPORt utility ...

Oracle Doubts about IMPDP FULL=Y

I need migrate a database.I used the DBCA to get a template of source database, with only the estructure ( tablespace/datafiles), no data.Up to now Ok.In the import of data , I know that I can do a exp FULL=Y, and a imp full=Y IGNORE=Y, and normally work fine.But now a wanna use the datapump. So for ...

Oracle Restoring with impdp

We're hosed in DEV. Our upgrade to 10.1.0.5 that we're backing out of (to 10.1.0.3) isn't going so good, at least our ColdBackup of the latest 10.1.0.3 copy has corrupt data blocks and RMAN errors out when we try to recover them.So, we've got a full expdp of the system prior to the upgrade. Are we b ...

Oracle What I need to import database -impdp.

HelloI have genreal question what I need if I want to create the copy of databse form DMP filr made by expdp full=y.Now I want to cretae this databse by impdp full=y. BUT I have another paths (Windows system). After one week finally I can cretae instance, startup instance and now I fight with this " ...

Calling expdp as sysdba

When I try to perform an "impdp full=y", the process errors out at a point because we have max_enabled_roles set to 148. Apparently, the user account running the impdp gets these roles assigned to themselves, and after 148, everything crashes. This param cannot be increased over 148.So I w ...

Oracle Importing an export file errors

I have to import it into a clean database that has a different character set. The migration i'm performing requires an interim step where I run a unicode upgrade process on a temporary db. Then, I perform the export (full) and then import into a new database that has a different character set. When ...

Oracle Question on impdp with FULL=Y

DB Version:10gR2To recreate a db, we are going to take the dump of the entire database usingexpdp user01/password directory= dpump_dir full=y dumpfile=Fulldb.dmp logfile=Fulldb_exp.log Two questions:1. Before importing , i need to create a basic DB (using DBCA or Manually using CREATE DATABASE comma ...

impdp not importing anything

I have copied across datapump files which were created on our test system last night (RHEL 5.5, 10.2.0.4), and am wanting to import some tables in, however, when I run the import command, I just get the Datapump banner. The parfile used to run the backup is as follows:dumpfile=full_101115_0500_datap ...

Oracle impdp.exe 10g -> 10gXE problem

Hi, i have a little problem with Oracle 10g XE. In our company we have full oracle 10g. Now we have to do backup server so we choose XE edition. But when we trying to import *.dmp file with impdp.exe we have an error. we did new database like this: # create new foldersmd c:\oraclexe\app\oracle\admin ...

Oracle How to turn off ORA-31684 during impdp?

when impdp a schema like:impdp emsuser/mypwd DIRECTORY=dmp_dir table_exists_action=replace DUMPFILE=$dmp schemas=emsusergot the ignorable annoying ora-31684. HERE ignore=y doesn't work anymore.Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit ProductionWith the Partitio ...

Oracle while using data pump (impdp) how to rename references within objects?

using 10g;what i want to accomplish is to change schema & tablespace ownership using the data pump method via the command line; i have had success using the command line for expdp / impdp. Problem is that there are objects that reference the old schemas that DO NOT get updated (e.g. procedure ma ...

Oracle "exp vs expdp" & "imp vs impdp"

I have to use expdp and impdp utility for database export and import purpose . I have 2 questions & also have a problem regarding these utilities . Question :In Oracle10g Envionment :1) What is main difference and advantage using 'expdp/impdp' between 'exp/imp' utility . 2) Is it possible to use ...

Oracle expdp/impdp: database links not imported

I took full export of a database(source database) using expdp as follows.expdp userid=\"/ as sysdba\" full=y dumpfile=db1.dmp logfile=db1_exp.logThen, I imported it using impdp as follows, on the target database.impdp userid=\"/ as sysdba\" full=y dumpfile=db1.dmp logfile=db1_imp.logAfter the import ...

Oracle datapump impdp issue.....really slow

hiUsing data pump expdp ,I could export 7gb table (partitioned) in 5 min.Whereas impdp is taking hours n hrs ofcourse still going on.....below is the statement i used(I'm doing data only ,as I'm trying place the partitions in separate tablespaces)impdp oldlls/xxxxx tables=oldlls.INTERPRETATIONCALLS ...

Oracle impdp - Steps

Running ver 10.2.0.2.I did a full expdp. Now I want to impdp into the empty database.I did -- impdp system/**** directory=dp dumpfile=ccc.dmp sqlfile=imp.sqlI modify the sql file and change all the path and the ORACLE_SID name to the right box.Now, run the imp.sql in the sqlplus.Do I still need to d ...

Oracle impdp

HII have expdp a database to a dmp file. But when I want to impdp to another database at the second time, it give me an error ORA-31684.How can I overwrite all the objects(include table, data, view, package, sequence......) into another database.I just know TABLE_EXISTS_ACTION parameter can place ta ...

Oracle Datapump impdp error LPX-00216

Guru, i am trying to import 150GB size db failed with error below :### Detailed Problem Statement ###impdp "'/ as sysdba'" directory=dpdata dumpfile=episfile1%U.dmp full=y job_name=episuatimport2 File List :-rwxr-x--x 1 oracle dba 23075409920 Jan 12 17:02 episfile01.dmp-rwxr-x--x 1 oracle dba 277069 ...

Oracle impdp slow. how to improve the performance?

I expdp a few tables from a server within about 30 minutes. The dump file size is about 600m.When I impdp the tables to another db server, I kicked off two sessions. One session for the biggest table, and one session for the rest of the tables in sequence. It took 17 hrs to finish.Here is the comman ...

Oracle impdp table_exists_action=append is not appending records

I am trying to import a dump using impdp tool with table_exists_action=append mode. However import fails with below error.ORA-31693: Table data object "TESTDP"."TEST" failed to load/unload and is being skipped due to error:ORA-00001: unique constraint (TESTDP.SYS_C0033971) violatedI understad that t ...

Oracle expdp and impdp not loading primary key, unique index

HiI am export SCHEMA level and import to other database. but it not loading constraints like ( primary key, unique key)examplefor EXPDP - schema is : qablrexpdp qablr/qablr schemas=qablr directory=backup_dir CONTENT=all dumpfile=qablr-`date +%d-%m-%Y`.dmp CONTENT=all logfile=qablr-`date +%d-%m-%Y`.l ...

Oracle problems with impdp

I tried to update a test-database. For this reason i´ve used a full exp of the real-database and then used remap_schema for import cause only one schema had to be updated. But the import makes a full import. I don´t know what I did wrong, can someone help me please?database: 10.2.0.3os: SLES10expo ...

Oracle IMP vs IMPDP

is there anyway in to use in IMPDP something like the ignore=y from the old imp in ORACLE 10g,The table_exists_action=append do not solve the issue since if a constraint is violated it will not insert the records with the correct constraint, nothing will be inserted into the destination table while ...

Oracle impdp command with TABLE_EXISTS_ACTION=REPLACE option !!!

I am using Oracle 10g in my production server .Production server has 3 schemas : schema1 , schema2 , schema 3 . First day , I have to import full backup to a test server for the first time like following : impdp system/passwd directory=test_dir dumpfile=production_full.dmp full=y logfile=prod.logIn ...

Oracle impdp error: ORA-02369

What's wrong: F:\com\Export>impdp system/test@test full=y dumpfile=EXPDP_FULL:com_dp.dmplogfile=EXPDP_FULL:fullimp_dp.logImport: Release 11.1.0.7.0 - 64bit Production on Donnerstag, 30 Juli, 2009 14:56:49Copyright (c) 2003, 2007, Oracle. All rights reserved.Angemeldet bei: Oracle Database 11g Rel ...

Oracle IMPDP Error (ORA-39000/ORA-31640/ORA-27041)

Need help on this. I have done the following steps.1. Create DATAEXP directory and assign priviledge under SYSTEM:CREATE DIRECTORY DATAEXP AS 'Z:\DBDump';GRANT READ, WRITE ON DIRECTORY DATAEXP TO PUBLIC;2. Create batch file and execute:set oracle_sid=orclimpdp system/system full=y DIRECTORY=DATAEXP ...

Oracle impdp exclude=schema

Doc ID: 341733.1 says to use this syntax for exclude:EXCLUDE=TABLE:"IN ('EMP', 'DEPT')"but when I try a similar one like this:impdp system full=y directory=dpump_dir1 dumpfile=fred EXCLUDE=SCHEMA:"IN ('ANONYMOUS', 'APPQOSSYS', 'DBSNMP', ...... 'WMSYS', 'XDB')"it throws these errors:ORA-39001: invali ...

impdp utility throwing an oracle 1017 error

gurus I exported an schema using expdp utility. I exported the schema being the schema owner. E.g lets say the schema name is clincialgov I used the following commandexpdp clinicalgov/password PARFILE=dmpexport.txt, and here is the content of the parameter file "dmpexport.txt"SCHEMAS=clinicalgovCONT ...

Oracle Question On Expdp Impdp

I have created a new db using dbca in silent mode, it was a successfull install and now i have to do a full imp of a dump file in the newly created db.I was planning to use the following syntaximpdp \"/ as sysdba\" directory=data_pump_dir dumpfile=Backup.dmp logfile=Backup.log full=y job_name=Backup ...

Oracle Question on IMPDP 11g

I would like to keep one of my development DBs up to date by using a full database 'Data Pump ' export file from another 11g host (both database are 11g on Redhat 5). I would like to overwrite the entire database on my development host and update it by importing the EXP data. What would the IMPDP co ...

Oracle Full expdp and impdp: one db to another

I Would like to ask for any help regarding my problem. I would like to create a full export of one database to and import it on another database. This 2 database are on a separate machines.I am trying to use the expdp and impdp tool to do this task. However, i have been experiencing some problems du ...

Oracle Dmp file compatibility issues with impdp (AIX / Windows)

Firstly please go easy on me as i'm new to datapump being an imp/exp stalwart, that said I've received some customer data created using expdp that i must load into our 10.2.0.4 windows environment. The dmp file was exported from a 10.2.0.4 environment running on an AIX server. My immediate concern w ...

Oracle impdp

imp userid=system/manager file=expdata2.dmp ignore=Y grants=N indexes=N rows=Y log=impdata1.log full=Y constraints=N I want to use impdp commandwhat is the similar parameter for the above in impdp commandimpdp userid=system/manager ?? ...

Oracle Confusing impdp and expdp stuff

Hello, I am kinda new to Oracle in general.Building a test environment.Want to move a production schema to a test RAC db i have built.I read up and decided that expdp would be the best method ( correct me if i am wrong please )I am on oracle linux.Now I have expdp'ed a schme succesfully but when imp ...

Oracle impdp utility

i am trying to import a dump file but i am not able to import its showing error.i tried something like this.[oracle@localhost ~] $ impdp sarah/pass@db directory=backup dumpfile=sarah.dmp nologfile=y.here is the error.ORA-39001: invalid argument valueORA-39000: bad dump file specificationORA- 39143 : ...

Oracle IMPDP Slow

My database is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi.I am using impdp to import tables with LOBs. Due to space restriction I am directly importing without creating dump files. impdp userA@db network_link=db_link_name content= data_only NOLOGFILE=y parallel=16 table=table_A ...

impdp import errors Oracle 11.1.0.6

I need help. I've searched help sites/forums for the past few days and have not found a solution. I am new to using impdp and cannot get it to work. My prior experience was the old "imp" utility. We recently upgraded to 11.1.0.6 database and trying to import an export file created from 11.1.0.7 usin ...

Oracle continue impdp after system rebooted

i'm trying to import a database on a local system. i need to do it on a normal system because i have no servers available and i only have to do some "tests".it started the import with this command: impdp SYSTEM/****** directory=impdp dumpfile=ccrexpdp.dmp logfile=implog.log full=yWindows was so frie ...

impdp issue with disconnection of Oracle (no recovery)

I am trying to import a data dump generated from an Oracle Enterprise Manager 10.2.0.4.0 on a unix server with the following command:expdp mc/XXX DIRECTORY=EXPORT_DIR DUMPFILE=SLTN-MCEXPORT-2010-07-22.dmp SCHEMAS=MC LOGFILE=SLTN-MCEXPORT-2010-07-22.logI want to import it in oracle XE 10g (10.2.0.1.0 ...

Oracle impdp without data

we used to use imp utility is below:imp system/manager ROWS=N SHOW=Y FILE=***** what is the equivalent for impdp as dump was exported using expdp ...

Oracle EXPDP/IMPDP TIMESTAMP0

I encountered a strange problem when I was doing an export from a 10.2.0.3 on solaris to a 10.2.0.3 databsae on another solaris box.expdp system dumpfile=db_20100617.dmp logfile=db_20100617.log directory=expdp full=y compression=metadata_only parallel=2 status=30 and this is my import statementimpdp ...

Oracle impdp 11Gr2 from 11Gr1: Can't create tablespaces??

I'm having problems importing from a database instance on an 11Gr1 RAC server, to a newly created instance on a 11Gr2 server.Looking through the logs, looks like the problem right off to bat is...it can't create the tablespaces...? I thought it could create the tablespaces if they weren't there alre ...

jQuery Trouble with event position X/Y - anyone else?

I'm developing a little app that involves positioning a translucentdiv near the cursor, and the numbers aren't adding up. I'm using theDimensions plugin and subtracting an element's offset from the event'spageX/Y coordinates, and the X coordinate is consistently about 53pixels of ...

jQuery finding y position

I want to find the position of the top of a div (distance from top ofwindow), so I can calculate and set the height of another div. How can I getthat? I'm a little confused as to how to use offset, which returns valuesfor both x and y.Thanks!-- View this message in context: http://www.nabble.com ...

jQuery IE 2px out on event.pageX/Y

Has anyone come across this before, coz it's been driving me nuts!IE7 and IE6 are both reporting the cursor position as 2px greater - both Xand Y - than the actual position, say, of a div on the screen.For example, given an absolutely positioned div at 100(top), 200(left), witha mousemove event ...

jQuery UI - How do I get the X and Y of the DROP div

I'm using the example at:http://docs.jquery.com/UI/Droppablesand I have the BLOCK dragging and able to drop it, but I want theBLOCK to take the X and Y position of the DROP div, I'm not sure howto find that outAlso what are the ev, ui in the drop: function? Will UI give me theactual DROP div ...

jQuery event.pageX/Y in IE

I am not sure how I missed this early in my plugin development, but Isee it now.For my new hover plugin, I noticed jQuery was extending the eventstructure with extra mouse information such as:event.pageY and event.pageXand that this extended event is passed to my show and hide handlers.Well, to make ...

jQuery Simplifying this X/Y box display adjustment

I wrote a tip plugin for our needs and spent much of the design timegetting the cross-browser correct placement of the tip box within aBODY container (viewport) or a user-defined viewport (a specific <DIV>id passed to the plugin settings). I think I finally got it allworked out.The requirement ...

jQuery accordion setting height: 0px, overflow-y: hidden

Hi,I'm using the accordion widget that came with the recent release ofjQuery UI and I'm having trouble getting the right height of thesecond content of the accordion. The code is as follow:$(function(){    $("#side-content").accordion();});$(function(){  ...

jQuery accordion setting height: 0px, overflow-y: hidden

Hi,I'm using the accordion plugin that came with the first release ofjQuery UI and I'm having some troubles getting the right height of thesecond content of the accordion.The code is as follow:$(function(){    $("#side-content").accordion();});$(function(){ ...

jQuery Accordion setting height: 0px and overflow-y: hidden

Hi,I'm using the accordion widget that came with the recent release ofjQuery UI and I'm having trouble getting the right height of thesecond content of the accordion. The code is as follow:$(function(){$("#side-content").accordion();});$(function(){// Load the tags and after clicki ...