Oracle impdp exclude=schema

Doc ID: 341733.1 says to use this syntax for exclude:EXCLUDE=TABLE:"IN ('EMP', 'DEPT')"but when I try a similar one like this:impdp system full=y directory=dpump_dir1 dumpfile=fred EXCLUDE=SCHEMA:"IN ('ANONYMOUS', 'APPQOSSYS', 'DBSNMP', ...... 'WMSYS', 'XDB')"it throws these errors:ORA-39001: invali ...

Oracle impdp exclude index

Good day...DB version is 10.2.0.4Table of 36gb is exported and while importing using impdp i gave exclude=INDEX:\"IN\(\'GMF_LOT_COST_DETAILS_U1\')" But after this too..while importing it tries to import the index..as i could see the number of rows increasing in the index..why it is so? Doe ...

Ubuntu tar newer and exclude options does not run together

Im trying to make backups using tar, and incremental backups using --newer. The scripts are:tar -czvf $DISKPATH/backupRepos.tgz /home/repos/ --exclude /home/repos/Tempfor general backup (on saturdays)andtar -czvf --newer="`date -r $DISKPATH/backupRepos.tgz +%F`" $DISKPATH/backupRepos-inc.t ...

Ubuntu What's wrong with my tar command syntax?

I thought I was following directions well but apparently not.I created a backup of my system with the following command:cd /sudo tar -cpvzf mybackup.tgz /Note: in the above, I left out the --exclude= options in this post for clarity sake but I did actually exclude the usual directories, ie. /lost+fo ...

creating shortcuts

Good Day,Not sure if vbs is the best solution for this problem or not but i know i can not do it in dos and i have no exprience with any other codeing except vba in ms access. I have my dvd's i bought copied to hard drives. they are located in on various external hard drives, the folder structure is ...

Ubuntu reinstalling backed up files without crashing system

i was running ubuntu 5.1 breezy (right, breezy?) anyway . . . i backed up the hard drive to a .tgz file using numerous --exclude options etc. as i have done for the past 3 years and everything seemed fine but some documents from my home directory disappeared. i went to the backup and they were all b ...

Ubuntu multicd successful but disks unreadable?

After something of a struggle managed to get multicd to produce some backup CDs. cdrecord which it used claimed to have written these successfully, and multicd appeared to terminate normally. However I can't read the resulting disks. :confused: Am I right in thinking they are therefore worthless? SH ...

Ubuntu lacking regexp knowledge with fmirror

everybody, I admit I don't have a deep undertanding of Regexp. I'm looking for a suggestion on how to make fmirror backup all the files and directories inside a directory.In few words, I'm required to write a line as follows ...include: [i][x][n]{p|f} patternA regex pattern that, if matched in a par ...

Ubuntu bash script for backup - stupid question

I have written a small shell script that backs up my home folder.#!/bin/bash# Backup data# Rsync logOUTPUT=/home/viz/.rsync_bck# Keep 14 incremental backupsBACKUPDIR=snapshots/`date +%a`_`date +%P`# Kind of standard options, including svn-auxiliary files removal.OPTS="-vazhutC --stats --stats - ...

Ubuntu How to make a live CD/DVD from your harddisk installation

Transforming your Installation into a Live DVD/CDThis HOWTO is about making a live CD/DVD from the main system on your hard drive. This might be desired if you have customized your system and want to have it on CD.Another approach that will be discussed here is building your live CD/DVD from scratch ...

Ubuntu problems with rsnapshot

I'm having problems configuring rsnapshot. I got about 2TB of data which will change about 100MB per day and schould be backed up to another seperated harddisk mounted on /backup.As most of the data was already present on the backup disk I moved it to /backup/hourly.0/localhost/ and then started rsn ...

Oracle I need help with IMPDP and the parameter 'EXCLUDE'...

all... Im new at this forum and Im looking for some help =)I'm working with DataPump (EXPDP and IMPDP), and I'm importing some tables from HR... I'm able to import those tables without any problem, but I have to exclude the TRIGGER and PROCEDURES. I'm using the parameter EXCLUDE=TRIGGER,PROCEDURE an ...

Oracle IMPDP not working with exclude TABLE_STATISTICS and INDEX_STATISTICS

I am trying to use TABLE_STATISTICS,INDEX_STATISTICS but not working.My par files has belowEXCLUDE=TABLE_STATISTICS,INDEX_STATISTICS Error :With the Partitioning and Real Application Testing optionsORA-39001: invalid argument valueORA-39041: Filter "EXCLUDE" either identifies all object types or no ...

Command Line options to exclude instrumentation for specific functions

I am trying to build a part of code using RTRT and cygwin compiler. The module consists of 10 functions and i want to exclude one function without instrumenting but compile all the functions.When we instrument using RTRT GUI it has an option to set in the configuration settings there is an option Se ...

Oracle IMPDP Help needed please...ORA-39083: Object type PROCOBJ failed to create

OS=Win2003DB=10gR2Version = 102.0.4Hi,I am running a impdp on a 30gb file and well it seems to have gone fine (much faster then it normally does to be honest), but towards the end it fails, and when researching this error, it seems to be very vague and I was wondering if someone can help me. Below i ...

Oracle impdp hung...any idea...

HiImpdp has hung for long time ,I had to cancel the operation.....when i check the dba_datapump_jobs say not runningAny particular reason.......I have recently create database manually , so I'm impdp data into new one...is there any script or something I forgot to run....below is the log..please adv ...

Oracle impdp error ORA-39083 and ORA-01427

I try to run impdp with Oracle 10.2.0.1.0 and error code is:;;;Import: Release 10.2.0.1.0 - 64bit Production on Wednesday, 22 April, 2009 17:01:32Copyright (c) 2003, 2005, Oracle. All rights reserved.;;;Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit ProductionWith th ...

Oracle ORA-00001: unique constraint @ impdp with table_exists_action=truncate

I can't understand why my data pump import execution with parameter TABLE_EXISTS_ACTION=TRUNCATE returned ORA-00001 (unique constraint violation), while importing schema tables from a remote database where the source tables have the same unique constraints as the corresponding ones on the target dat ...

Oracle IMPDP hangs but no error messages

I have completed several schema level imports into a new 11.1.0.6 database on a new Windows Server 2003 64 bit server quad core with 16GB of RAM, but one schema gets to the "TABLE_DATA" stage and seems to hang, it never progresses but does not stop or display any error messages either.The impdp outp ...

Oracle expdp/impdp ORA-39005: ORA-31600: invalid input value NULL for parameter VA

I did an export from a 1g database and am trying to import into an 11g database.Below is the command I command and error I get. Can someone please tell me what I am missing here? I am only trying to import the tabl prodspects from progbeta schema to prod_test schema.When I did not specify REMAP_SCHE ...

Oracle impdp ORA-39088

Was wondering if anybody could shed some light on this..here's my error:[oracle@orac2 CLARITAS_07]$ impdp lsledge@neo2 PARFILE="/export/CLARITAS_07/CLARITAS_07_IMPORT.PAR"Import: Release 10.1.0.3.0 - 64bit Production on Thursday, 18 October, 2007 10:51Copyright (c) 2003, Oracle. All rights reserved. ...

jQuery r2983 commited - spinner: swapped options.hide for options.buttons and refactored auto-...

Revision: 2983Author: pazu2k@gmail.comDate: Sun Jul 26 14:43:51 2009Log: spinner: swapped options.hide for options.buttons and refactored auto-hide feature.http://code.google.com/p/jquery-ui/source/detail?r=2983Modified:/branches/dev/spinner/ui/ui.spinner.js=======================================--- ...

FC4; rsync --cvs-exclude

Hello, using "rsync" is an important part of my work, and I have routinely done so onred hat, FC3 and Sci Linux. Now, on Fedora core-4 (FC4), same shell script as usual,I cannot make rsync work when the option "--cvs-exclude" is present (all others OK).Here is the message I get;- ...

impdp not importing anything

I have copied across datapump files which were created on our test system last night (RHEL 5.5, 10.2.0.4), and am wanting to import some tables in, however, when I run the import command, I just get the Datapump banner. The parfile used to run the backup is as follows:dumpfile=full_101115_0500_datap ...

IBM SDK 5.0 JIT compiler options

Due to a potential problem with optimizations carried out against our code by the IBM J9 JIT compiler we are trying to take control of the configuration of the JIT compiler using the guidance set forth in the Diagnostics Guide, http://publib.boulder.ibm.com/infocenter/javasdk/v5r0/topic/com.ibm.java ...

Synergy 7.1: CLI baseline creation, option to include and exclude task, and

How to create a baseline using CLI with the options of specifying a baseline projects, and option to include and exclude task to be included in the new baseline base on the update properties, In GUI, we can update the project, uncheck the tasks that is not to be included in the baseline, and then ri ...

Limit Drop Down Menu Options Based on Option Selected in Other Dropdown

I have what is probably a basic question, but am new to web development, so don't really know where to look for an answer. Any help is greatly appreciated as I have brick-walled on this one. I have a database of events that are organized by grandparent-parent-event_name structure. So Grandparent mig ...

Ubuntu grsync and --exclude (newbie question)

I'm new to linux and I have question about backup. I'm running karmic on a 64 bit deskttop and a 32bit netbook. I used grsync a couple of times to backup /home/ and it worked perfectly. Now I'd like to exclude a couple of directories and I ran into problem: based on several postings on the forum, I ...

Oracle IMPDP error

I use impdp utility to import a dump file as following steps:SQL> CONNECT SYS as SYSDBASQL> GRANT CREATE ANY DIRECTORY TO customer;SQL> CREATE OR REPLACE DIRECTORY data_pump_dir AS 'd:\temp';SQL> GRANT READ, WRITE ON DIRECTORY data_pump_dir TO customer;SQL>exitD:\Temp\impdp customer/c ...

Q:Custom Appwizard, Exclude file

I have written a custom AppWizard for VC++ which generates all necessary files for modules(dll's) in the project I'm currently working on. It also set all project spesific compiler options and adds all required .lib files in the Wizard. The problem is finding a method in the COM interface for VC to ...

Ubuntu Are there any more options for AWN than I get when right clicking the dock bar?

Compared to what I'm used to (Rocket Dock on WinXP) AWN seems a bit light on options - I'm using the 'AWN Manager' that you launch by right clicking on the dock bar.I've dragged a few icons onto there and the problem I have is that once I've launched one app from it and I then decide I want another ...

Oracle Problem with impdp

I have a strange problem with iumporting a dumpfile into my oracledatabase (Oracke 10gR1 running under windows XP). C:\>impdp system/daniel@sigkopie directory='D:\Documents and Settings\DE11605\Desktop\oracle-backup' dumpfile=SIG.dp remap_schema sa:ECSImport: Release 10.2.0.1.0 - Production on Di ...

Oracle IMPDP

I am having the worst time with a Data Pump Import. I am using the following command:impdp <username>@<remotedb> DIRECTORY=<Directory "X" that points to "\user\chips\datapump\"> DUMPFILE=<" in directory "X">CONTENT=ALLREMAP_SCHEMA=<devSchema>:<tstSchema>TABLE_EXIS ...

Oracle How to impdp a database to another computer ?

Oracle experts,I try to import a database whose dumpfile is lying on my local computer via impdp onto another computer.My problem is that I don't know how to tell impdp that my file is on my local computer and not on my server.If I use the directory and dumpfile options then the server searches on i ...

Oracle ORA-39001, ORA-39000 and ORA-31619 Errors while impdp from linux to windows

When I use expdp and impdp on a database inside the same machine or between 2 machines using the same OS everything is OK.But when I want to cross the same database expdp and impdp, for instance:I expdp on linux RedHat 4 ES and want to impdp on Windows XPthen I have the folowwing errors:ORA-39001, O ...

Oracle expdp on 10gR2 and impdp on 10gR1

Is it possible to expdp on oracle 10gR2 and impdp on Oracle 10gR1?If not as I guess how may I cross over this problem?May be I should use exp and imp?or expdp and impdp with particular options?I need help ...

Oracle Impdp - ORA-39126: Worker unexpected fatal error in KUPW$WORKER.LOAD_METADA

I am trying to refresh my local DB and getting this error.I have recreated(drop and create) the SR user and tried importing the fresh copy.Import is working fine on the new Database i.e Deleting and creating the database.pl. help me finding the solution.version : 10.1.0.2.0 _____________________impo ...

Oracle Data Pump impdp DIRECTORY object for dumpfiles on shared network drive

Our customer has delivered Data Pump dumpfiles to a Linux Server where Oracle is not installed. We are attempting to use impdp from a Windows 2003 Server with Oracle release 10.2.0.3 installed. The following steps have been taken:1) Established a DIRECTORY object DATA_PUMP_DIR and verified that it w ...

Oracle expdp & impdp ????

I was trying out expdp and impdp options in oracle 10g. I was following instructions of a document which was posted in the net. When I give expdp command following error accured. can somebody tell me what should I do ????Also please let me know if there any examples which describes expdp and impdp. ...

Oracle DBMS_DATAPUMP Exclude STATISTICS

I want to be able to exclude the TABLE_STATISTICS (INDEX_STATISTICS) etc in the package I have written to export and import schemas. I know how to do it in EXPDP and IMPDP but cannot find the equivalent in DBMS_DATAPUMP. ...

Oracle Impdp - import objects into two tablespaces

HiI have exported a schema using the impdp utility from one database and plan to imort the schema to a different database. The schema in the source database was in one tablespace, but I want to place indexes in a separate tablespace in the destination database. My idea is to do two import operations ...

Oracle Exclude create user statements using datapump API

I’m trying to perform a schema import and exclude the "create user" statements using the datapump API but I can’t get the syntax correct for the dbms_datapump.metadata_filter call.Using impdp I use a parfile that includes the following statements:schemas=bob, johnexclude=userHow do I achieve the ...

Oracle ExpDp/ImpDP Error

I am New In Oracle 10g I want to Import a dmp file which was Exported by oracle 9i My Problem is Can I do it (import in 10g from 9i)My Second Problem is when I issue EXPDP or IMPDP Following Error is Come .........pls give me a solution ..........C:\>expdpExport: Release 10.1.0.2.0 - Production o ...

Oracle Strange problem with impdp

Oracle experts,I try to import a dunpfile generated by expdp (10g R2) on WinXP into my database (10g R2 on Solaris).First I trioed it with the command below :user@enterprise450 krings_herrath_orcl_270407 > impdp system/daniel@orcl dumpfile=EXPDAT01.DMP directory=krings Import: Release 10.2.0.1.0 ...

Oracle changing build options from within application

Is it possible to change an applications build options from a page process.I'm developing an application where the user can buy additional modules ( which currently have their build status set to exclude) and I want to be able to change the buils status to Include from within the application. ...

Oracle changing build options from within application

Is it possible to change an applications build options from a page process.I'm developing an application where the user can buy additional modules ( which currently have their build status set to exclude) and I want to be able to change the buils status to Include from within the application. ...

Oracle Speed Up Impdp Import

I have a table with 1 million rows, containing the following columns:1) NUMBER (Primary Key)2) Date 3) Varchar(8)4) CLOBThe sum total size of the CLOB column is about 3 Gig. SQL> select sum(length(text)) from indexdata;SUM(LENGTH(TEXT)) 3119272825My hardware is an 8 CPU (4 dual core) Dell with Mi ...

Oracle How to impdp data only into a specific schema

How to impdp Tables and Materialized Views only into a specific schema. Also, how to exclude certain tables in particular schemas from being imported. ...

Oracle ORA-39776 from impdp

GreetingsI am trying to do a test import with impdp from a 10.1.0.5 system to a 10.2.0.1.0 system. I have the following parfile:DIRECTORY=image_importremap_schema=track2:image_adminremap_tablespace=users:image_testremap_tablespace=indx:image_testjob_name=impdp_track2_try1logfile=impdp_track2.logdump ...

Oracle How to turn off ORA-31684 during impdp?

when impdp a schema like:impdp emsuser/mypwd DIRECTORY=dmp_dir table_exists_action=replace DUMPFILE=$dmp schemas=emsusergot the ignorable annoying ora-31684. HERE ignore=y doesn't work anymore.Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit ProductionWith the Partitio ...