Oracle IMPDP ignore=y

I am importing table A records into Table BTable A haiving 1000 records.Table B having 100 records.I want to import through IMPDPWhat is option in IMPDP which is equivalant to IGNORE= Y in IMPORt utility ...

Oracle Problem with IGNORE=Y in imp (Import)

My requirement is to refresh a schema with the imp command (Import). When I use IGNORE=N, then it tries to create tables which are already exists and errors out as all the tables are existing in my case (as my intensions is to refresh not to create). If I select IGNORE=Y, this imp command is trynig ...

Oracle what is ignore=y in import n export

what is ignore=y in import n exportandwhat is diffrnce betwen conventional path n direct path ...

Oracle Import, ignore=y : what if FK, procedures, exists

I need to re-run the full import (the data in the tables were corrupted thus deleted). The full import takes around 2 days so I would like to keep as many db objects as possible (to not drop them all)I want to do the import with IGNORE=N. There are all (numerous) procedures, constraints, views, syno ...

Oracle DUPLICATE PLEASE IGNORE verify impdp completed successfully then send email

I am creating a daily job refresh a test database.Basic steps1. kill all sessions/connections to database.2. drop schema 1 and schema 23. impdp schema 1 and schema 24. verify that impdb completed successfully. If job did not complete successfull send an email to DBA. If job did completed successfull ...

Oracle Doubts about IMPDP FULL=Y

I need migrate a database.I used the DBCA to get a template of source database, with only the estructure ( tablespace/datafiles), no data.Up to now Ok.In the import of data , I know that I can do a exp FULL=Y, and a imp full=Y IGNORE=Y, and normally work fine.But now a wanna use the datapump. So for ...

Oracle How to turn off ORA-31684 during impdp?

when impdp a schema like:impdp emsuser/mypwd DIRECTORY=dmp_dir table_exists_action=replace DUMPFILE=$dmp schemas=emsusergot the ignorable annoying ora-31684. HERE ignore=y doesn't work anymore.Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit ProductionWith the Partitio ...

Oracle "exp vs expdp" & "imp vs impdp"

I have to use expdp and impdp utility for database export and import purpose . I have 2 questions & also have a problem regarding these utilities . Question :In Oracle10g Envionment :1) What is main difference and advantage using 'expdp/impdp' between 'exp/imp' utility . 2) Is it possible to use ...

Oracle impdp table_exists_action=append is not appending records

I am trying to import a dump using impdp tool with table_exists_action=append mode. However import fails with below error.ORA-31693: Table data object "TESTDP"."TEST" failed to load/unload and is being skipped due to error:ORA-00001: unique constraint (TESTDP.SYS_C0033971) violatedI understad that t ...

Oracle IMP vs IMPDP

is there anyway in to use in IMPDP something like the ignore=y from the old imp in ORACLE 10g,The table_exists_action=append do not solve the issue since if a constraint is violated it will not insert the records with the correct constraint, nothing will be inserted into the destination table while ...

Oracle impdp

imp userid=system/manager file=expdata2.dmp ignore=Y grants=N indexes=N rows=Y log=impdata1.log full=Y constraints=N I want to use impdp commandwhat is the similar parameter for the above in impdp commandimpdp userid=system/manager ?? ...

Oracle Confusing impdp and expdp stuff

Hello, I am kinda new to Oracle in general.Building a test environment.Want to move a production schema to a test RAC db i have built.I read up and decided that expdp would be the best method ( correct me if i am wrong please )I am on oracle linux.Now I have expdp'ed a schme succesfully but when imp ...

Oracle How to Ignore the errors while exporting

i am trying to import a dump using imp command. Out of 10000 user objects, 5000 objects has got imported successfully. Meanwhile because of a LAN failure, import was not able to continue. And again i tried with import the same. System is trying to import each and every row in table, and the log file ...

Oracle Export / Import with FULL=Y

after consulting several thread on exp/imp with the option full=y the doubt that I have left is when using imp with full=y ignore=y in a new data base, the data base obtained will be equal to the data base from which export with full=y became. ...

Oracle IMP Error while doing with FULL=Y

I have a full db dump and importing with following caluseimp "'/ as sysdba' " file=R1_2007_UAT_260807.dmp log=R1_2007_UAT_260807_imp.log full=y commit=y grants=y ignore=y skip_unusable_indexes=y feedback=25000 statistics=none but getting following error for some user/profile missing.my doubt is like ...

Oracle How to ignore Errors while importing !!

i am trying to import a dump using imp command. Out of 10000 user objects, 5000 objects has got imported successfully. Meanwhile because of a LAN failure, import was not able to continue. And again i tried with import the same. System is trying to import each and every row in table, and the log file ...

Oracle Import error in Full=y

Few days back , i had a problem for export dmp file of entire database.But with help of the FORUM , i could success on creating full DMP file.Now i wanted to import that DMP file in to the target machine.as basic requirement of target server , i deleted newly created user who is having admin rights ...

Oracle imp full=y issue.

Database: 10.2.0.1 OS: AIX 5Li am exporting a full db dump from Server A to Server B. for this purpose i created a user dbadmin on both source and target database and granted him (EXP_FULL_DATABASE & IMP_FULL_DATABASE) privlegs. Server B is a empty Database. i issued follwoing command " imp dbad ...

Oracle imp full=y issue(Sorry guys- Repost)

Database: 10.2.0.1 OS: AIX 5Li am exporting a full db dump from Server A to Server B. for this purpose i created a user dbadmin on both source and target database and granted him (EXP_FULL_DATABASE & IMP_FULL_DATABASE) privlegs. Server B is a empty Database. i issued follwoing command " imp dbad ...

Oracle imp with STREAMS_INSTANTIATION=y takes too long...

I am in process of implementing streams between 2 10gR2 databases on Linux.During this process i noticed that imp command on the target database with these parameters takes so long...imp userid=bill/till fromuser=bill touser=bill FILE=/tmp/bill.dmp IGNORE=y COMMIT=y LOG=/tmp/bill.log STREAMS_INSTANT ...

shell script to search thru a directory by passing parameter

I am using shell scripts to export and import data from oracle tables using expdp and impdp oracle data pump utilities. Having written shell scripts to do the export part, my export file names are in the formatexp_groupn_mmddyy where i) groupn can be group0,group1,group2,group3 or group4 (n=0,1,2,3 ...

Oracle full database import fails

I am trying to transfer versioned data from OWM_VERSION 10.1.0.6.0 to 10.2.0.1.0 using the Data Pump utility. Database versions are 10.1.0.3.0 and 10.2.0.1.0.Import parameters are: FULL=YTABLE_EXISTS_ACTION=APPENDCONTENT=ALLThe transferred versioned data are incomplete. I am sure that am losing the ...

Oracle calling a

I am calling zero_test_create.sql from my shell script. But it is getting stuck after calling the zero_test_create.sql. I guess I am not able to exit from sqlprompt with zero_test_create.sql. If I run zero_test_create.sql. It is working fine.In zero_test_create.sql I am trying to disconnect, drop an ...

Oracle how to EXP/IMP only data ? 9i ,not using data bumper

does anybody knows how to exp or imp only data of the tables i have a database dump of user AA ,it's rather small all my data are reset to default by running scripts , and i wanna restore them to the point of exp backupbut if you imp all , tables , triggers , views , they are all there i chose " imp ...

Oracle Data Pump: Importing partitioned objects into target DB w/o partitioning

I have the following issue when importing partitioned tables from a source DB to a target DB without the partitioning option.In this scenario, the tables and indexes on the target are already present, solely without partitions. Release is 10gR2. First try: impdp user/pw directory=dump_dir dumpfile=t ...

Oracle Problem in Import

This is the syntax I am using for Import. My Oracle version is 11.1.0.7impdp system/ora11g directory=dbdump DUMPFILE=NBALOCAL_20100607.DMP LOGFILE=importawd.log remap_schema=NBAPEND:NBAPEND content=ALL EXCLUDE=STATISTICS TABLE_EXISTS_ACTION=TRUNCATEProblems:1. As I specified only NBAPEND:NBAPEND, it ...

Oracle HOW TO IMPORT DATA MORE THAN ONCE FROM THE SAME EXPORT DUMP FILE?

before asking my question i'd like to mention that i'm a french spoke... so my english is a little bit bad. sorry for that.my problem is : IMPORT how to import data a SECOND TIME from an export dump file within oracle?My Export dump file was made successfully (Full Export) and then itried to import ...

Oracle Problem in importing, procedures are invalid in cumulative Backup

problem in cumulative backup.I want to import the data(database1) from on machine to another machine(database 2) which is having all the data of database 1 but outdated. while importing from database 1 to database2, i gave parameter ignore=y.after importing, stored procedures are invalid in database ...

Oracle Problem in importing, procedus are invalid in cumulative Backup

problem in cumulative backup.I want to import the data(database1) from on machine to another machine(database 2) which is having all the data of database 1 but outdated. while importing from database 1 to database2, i gave parameter ignore=y.after importing, stored procedures are invalid in database ...

Oracle Problem in importing, procedus are invalid in cumulative Backup

problem in cumulative backup.I want to import the data(database1) from on machine to another machine(database 2) which is having all the data of database 1 but outdated. while importing from database 1 to database2, i gave parameter ignore=y.after importing, stored procedures, views are invalid in d ...

Oracle strage error(behavior) in imp

My problem is,when i import from a pc(tried in two pc) where the oracle client is installed i get the following error.(also tried to using the system/manager login)C:\Documents and Settings\anil.vn>imp userid=sankyo_uc@rajesh file = R:\Customized_Proj\Sankyo\Analysis_Input IGNORE ='Y'Import: Rele ...

IMP: ORA-12560 TNS:protocol adapter error

I have installed a Oracle 8.1.7 database and trying to import an existing dump, but I'm getting the error message "ORA-12560 TNSrotocol adapter error" when running the IMP command (see below). The instance already exist, but I want to overwrite existing data. I can connect to the database ...

importing an oracle dump to a new oracle db...

we have worked on an oracle db and now want to migrate it to the clients server...the problem is that not all data is imported followed by several warning & error messages..our side...exp system@db1 file=c:\expdat.dmp log=c:\exp.log full=y buffer=10000000client side...imp system@db2 file=c:\expd ...

import segmentation fault

I try to import an oracle 8.0.6 (AIX 4.3.2) export dump on oracle 8.0.6 (Solaris) and I get a Segmentation Fault :. Import d'objets IRMA dans IRMA. Import d'objets SYSTEM dans SYSTEMSegmentation Fault - core dumpedHere are my import params :buffer = 100000indexes = yrows = ygrants = yignore = yfull= ...

data import problems

i'm try to sync up a development oracle database (which already exists... and i added about 2G of extra data files to this dev db before import) w/ a production database. the file systems on the two macine are very different in structure. they are both running 8.1.5 on Linux. i ran the following imp ...

error during import

I've a export file (XX.dmp).I tried to import this dump for new records of tables there are in my db, but I get this errors:imp system/manager@mydb file=xx.dmp tables=A ignore=y fromuser=tom touser=tom log=xx.logExport file created by EXPORT:V09.02.00 via conventional pathimport done in WE8MSWIN1252 ...

How to check if a table is a partitioned table?

I try to import a schema objects from schema A database A to schema B database B. I use an export file. I did not import the data but only table,views,trigger etc.When i use the following command:imp user/pass file=file.dmp indexes=N grant=N rows=N ignore=yi have some tables that was not imported su ...

8i Full Import Hanging

I am doing a full import into a newly created 8i instance and the import appears to be hanging. It is hanging on a "CREATE FORCE VIEW" statement, during the importation of the view objects. It appears to have imported all the tables successfully, but is hanging in the middle of these views ...

problem in import.

I am on ora8i with win 2k adv server.I have a problem during import data from full exp dmp into test db>exp system/manager file=c:\expdat.dmp log=c:\exp.log full=y rows=y direct=y>imp system/pwd file=c:\expdat.dmp log=c:\exp.log full=y rows=yignore=yMy intention is the Test db should contain l ...

imp error message

I am attempting to import a dmp file from an oracle 8.1.7 release into 9.0.1.1.1 enterprise edition but when i run the imp command the following error occursIMP-00002: failed to open file.dmp for read Import file: EXPDAT.dmp>i have tried running this from a command prompt and sql plus. the imp co ...

Oracle Import Related Problem(Urgent)

I exported a user from IBM RS6000 Aix 4.3.3 and imported in same machine on another database,there is no problem with import.But i tryed with same export file in HP unixIT IS GIVE ERROR FOR TWO BIG TABLE HAVING SIZE 278MB (record 737000),it is showing table1 0 rows importedtable2 partial import roll ...

Oracle Urgent Help me out

I exported a user from IBM RS6000 Aix 4.3.3 and imported in same machine on another database,there is no problem with import.But i tryed with same export file in HP unixIT IS GIVE ERROR FOR TWO BIG TABLE HAVING SIZE 278MB (record 737000),it is showing table1 0 rows importedtable2 partial import roll ...

Export - Import question

Greetings,I am about to make export - Import in 8.0.4 database which runs under Windows NT server 4.0. I do this to defragment the database. I have a plan how to make it, though I would like you to confirm I am making it right (I am not used to databases running under windows).First:I open the comma ...

Slow oracle import help !

I am trying to recover a crashed database. The files I am importing have a few million rows each. I started the import below 12 hrs ago and I see no progress. The disks are spinning but thats about it. The screen still says the same thing it did when I launced it this morning. "Export file crea ...

IMP-00038 Error

I have a small problem. 2 years ago I have exported one table in a company "A" with EXPORT V08.01.07.Now I'm at the other company "B" and I'd like to import this table here.If I'm exporting now a simple test table; inside its *.dmp file is:EXPORT.V08.00.05.And after starting an:i ...

Import tool

HelloMy production database makes an export (for a related schema) operation every day at night . So I get this .DMP files in a directory with a size of 600 Mb each one.I also have a second database for tests and development that is suppose to be a real representation of the production database. So, ...

Import taking like forever

I have an exported file about 11 GB. I am trying to import the file into schema. The first command I used is ( to import only definitions )imp sys/%PWD%@%ORACLE_SID% fromuser=xxx touser=xxx ignore=y rows=n indexes=y grants=y commit=y buffer=5000000 file=%O_DATA_PATH%\%FILE% log=%O_DATA_PATH%\%ORACLE ...

Import has no PKs, strange

Anyone have any idea why my morning imports have only a few primary keys on the tables instead of all the PKs?The export log has no errors.The import log only lists errors regarding the FKs (obviously due to the lack of PKs). Export parfile:> more do_exp.par direct=Y consistent=N statistics=NONE ...

import data to oracle server

I am trying to import to oracle 9i database on windows 2000 advanced server setup at home.i am getting following error when i try to run below command in command promptimp findba/findba file= D:\treasury\aeat1u_dump_29Jul.dmp log=D:\treasury\findba.log fromuser=ops$utcaebg1 touser=findba full=Y buff ...

problems importing from 817 to 920:

I’m trying to perform a manual database import/upgrade from Oracle 8.1.7 to 9.2.0 on an NT system.The export appeared to work fine, and the manual creation of an “empty” database also appeared to work fine.The import, however, is bombing spectacularly.my import statement is : C:>imp SYSTEM/pas ...