Ubuntu USB modem not working with modeswitch

I have received a new huawei k3770 usb modem but ubuntu 11.04 (32 bit) picks it up as a cd rom but not as a modem. Modeswitch is installed and I have reinstalled it as well. I have googled it but I found nothing. Any help here? ...

Firmware for huawei e960

pls. anyone can give a link on where to download the firmware for my huawei e960 modem and router. i badly need it,any reply will be appreciated.tnx to everyone. ...

Ubuntu 3G/HSDPA Huawei E160G working with Three Ireland

System:Toshiba Satellite 3000-514 (upgraded to 1 GB RAM)Xubuntu 9.10 Karmic Koala, Kernel 2.6.31.22.353G/HSDPA USB Modem:Huawei E160G, provided by Three Ireland, firmware version 11.608.06.00.156General hint: This modem has a socket for an external antenna. The mast I am getting my mobile broadband ...

Ubuntu Huawei Mobile Broadband not working after unlocking.

i am using ubuntu 10.04 .my huawei e1550 usb mobile broadband modem was detected out of the box and was working fine .But after unlocking it with a software,the modem is detected and when i connect ,it immediately disconnects.unlocking was some 'Firmware upgrade' . I tried other distros like pclinux ...

Ubuntu Huawei Mobile Broadand

I've got a new Huawei E182E Usb Mobile Broadband Device.I'm running Ubuntu 9.04 with the latest updates and it won't get recognized as a mobile broadband device by the network manager, i.e don't show up at all. And I've tried to manually configure the device with the correct parameters in the networ ...

Huawei ETS 2288 CDMA phone on Ubuntu 9.04 (not working)

HirecentlHave unsuccessfully tried to get the Huawei ETS 2288 CDMA (fixed Wireless Phone) not working on Ubuntu 8.04 and 8.10.Since then managed to lay hands on Ubuntu 9.04 and wanted to see if itfared any better.It did in one sense which makes me hopeful that it will work butsomewhere down the line ...

Ubuntu How i can connect to the internet using Huawei ETS 2552 in jaunty

Aslam o Alaikumi am new to jaunty and i want to connect to internet i have Huawei ETS 2552 wireless modem (simple usb modem i.e usb on both end)ubuntu jaunty has detected this modem and ttyUSB0 is created. Now what i have to do in order to connect to the internetMy internet configurations areprovide ...

HUAWEI ets2288 modem setup problem on UBUNTU 9.04

I'VE TRYED SO MANY TIMES TO CONFIGURE HUAWEI ETS2288 WIRELESS MODEM, I COULDN'T RESOLVE THIS ONE, ALSO I TRYED 8...VERSION UBUNTU CONGURATION.. DIDN'T WORKHERE SHOWN FOLLOWING ERRORPLZ HELP ME:redface::redface::redface::redface:[ 99.104050] usb 4-2: USB disconnect, address 2[ 99.104865] ti_usb_3410_ ...

Ubuntu How to configure Huawei ETS 2552

Aslam o AlaikumI m a new ubuntu jaunty user and i want to connect to internet via Huawei ETS 2552(simple usb i.e usb is on both end) but i m failed to configure huawei ETS 2552 modem. plz help me my dmesg files are given below.plz help me. i shall be thankful to you... plz help me[ 0.000000] BIOS EB ...

Ubuntu Huawei E169G and Dlink DIR-451

I have been trying to get the Dlink DIR-451 and Huawei E169G working and it almost works, but not quite. It seems to get chat errors when establishing ppp. I have spoken to Dlink support and they are very helpful. The current firmware for the DIR-451 is 1.02. Apparently E170G support will make it in ...

Ubuntu HUAWEI modem (CDMA phone) issue

I'm using the modem comes in Huawei wireless terminal CDMA phone. It works well in Windows XP and the drivers are there. But I don't have drivers for it for Ubuntu. I am using Ubuntu 6.06.When I connect the serial to USB cable in Ubuntu, it diaplays an error message as follows,[4297143.901000] usb 1 ...

Ubuntu Higher speed with HUAWEI E220?

I am currently running Ubuntu 7.04 and is online with the HUAWEI E220 USB modem.it is running 460800 baud allright.My ISP have made my download speed possible up to 7,2 Mbit/s and i have upgrade the firmware, so the modem also kan download with that speed.I have found out it is possible to run 92610 ...

Ubuntu Using modem in Huawei CDMA phone

Sorry I couln't mension that this is a Dial-Up modem issue. And another thing I noticed is, the ti_usb_3410_5052 driver coming with the kernel is 0.9 but the latest is 2.6-1.1. I tried to compile it but couldn't as the usb-serial.h is missing in the kernel source. :-( ..One last thing , I'm going to ...

Como Hacer andar un modem Huawei MT810 en Ubuntu

Este es un breve relato de como logre hacer andar la conexión ADSL de Arnet en Kubuntu, si a los moderadores les parece que este relato es algo inútil sientanse libres de cerrarlo.Estaba cansado, aburrido, hastiado del Win XP y el futuro (Win Vista) me asustaba mucho así que decidí pasarme a GNU ...

Ubuntu Me dejó de andar el Huawei

Hola,Hasta ayer tenía andando el alfajor (el módem/router Huawei SmartAX MT810 de Arnet) tanto en Ubuntu 9.04 como en Windows XP. Pero un amigo me trajo su gabinete para que le hiciera un service, y entonces desconecté mi gabinete y enchufé el de él. Cuando volví a enchufar el mío, en Windows ...

Ubuntu 3G Modem K3770 Setup

I am running Ubuntu 11.04 on an external USB drive on a Dell D630 laptop. My issue is I can't get my 3G modem to work. It is a K3770 Huawei modem.When I plug it in after boot up it is not recognized at all as far as I can tell. (Which is not very far).When I plug it in before boot up it shows up as ...

Ubuntu Huawei E5832S dongle not switching mode

I've been rolling my face on the keyboard over this for about a month. There actually seems to be a fair body of woes, workarounds and HOWTOS out there involving this class of Huawei device, but none regarding my specific model. I own an Huawei E5832S 3G/WIFI dongle, marketed in Ireland by O2 as the ...

Ubuntu Voice over Huawei E153 3G modem

Boys and girls,First, apologies if this is not the right section to post ..I have an unlocked, voice-enabled Huawei E153 HSDPA modem. What this means is that a) I can use that with any SIM card, from any provider and b) the modem has the firmware necessary to initiate and terminate voice calls.Furth ...

Firmware - Important Communication to IBM eServer p5 Clients

To IBM eServer p5 administrator(s):Thank you for your installation of the IBM eServer p5 system. The eServer p5 is acknowledged as a leader in the information processing industry in customer satisfaction and reliability. We're always striving to work with you for even higher levels of both. One of t ...

Need help in setting up hmc for using it for firmware upgrade

I have an hmc connected with p570 and p510 both are in full system partition mode (single partition) I used the hmc to start and stop the pseries machines, The hmc is not connected / configured to LAN. Can I use the hmc for firmware upgrade of my p570 and p510 and how. ...

Urgent firmware upgrade help required

my current firmware level is SF222_075 and I would like to upgrade it to the latest level i.e. SF240_261, please advice me is it possible to upgrade the firmware level to the latest level directly from SF222_275 to SF240_261 i.e. is there direct path available to upgrade SF222_275 to SF240_265 or I ...

upgrade firmware and ML, whic first and how

my curent: p550 OS 5.3L#lsmcodeDISPLAY MICROCODE LEVELIBM,9113-550The current permanent system firmware image is SF235_160The current temporary system firmware image is SF235_160The system is currently booted from the temporary firmware image. oslevel -g Fileset Actual Level Maintenance Level bos.rt ...

How do I install the speedtouch firmware driver from the zip file given on sourceforge.net

Can someone please tell me how to install the firmware for the speedtouch adsl modem. the file is in ZIP format so when I try to extract it it says: fs not supported. this is definately the correct firmware because all the online documentation points to the sourceforge.net site where I got it from.a ...

Determine presence of deferred firmware fixes from within AIX?

Is there a method from AIX to determine whether any deferred p5 firmware fixes are still awaiting an IPL for activation.I realize this information is available from the HMCs. I am looking for obtaining this information from the LPARs themselves. ...

Firmware (microcode) upgrade

I am planning to upgrade the firmware on our AIX server (Full Partition 7038-6M2 POWER4 p650) to the latest firmware upgrade 3K070425. I was looking for some known issues on the Internet, but I couldn't find anything special.I have some questions, any help greatly appreciated.- Are there any know is ...

Power5 Concurrent firmware via CLI?

We'd like to do our Power5 concurrent firmware updates using command-line from the HMCs since the WebSM/Java lag makes this difficult to do remotely. I know there are commands available to do this but the manpage documentation isn't thorough. Has anybody else developed a script or procedure to do th ...

Firmware updation

I am new for this fantastic world. I'd like to know how to update firmware. What is the latest one.what are the steps to download and install. If problem how to rollback. ...

How-To find Matching Firmware version for HMC and AIX

I would like to know how to find the min/max supported firmware versions for AIX 5.3 TL8 SP1.And If this AIX machine is a partition in a HMC then what how could i find the min/max supported firmware version for the HMC.Please let me know of any web-links where i can find the supported configurations ...

Power 6 System Firmware update

A new prerequisites has been defined for PowerVM (old APV), please refer to the table below when configuring or ordering this feature code: http://www-941.ibm.com/collaboration/wiki/display/WikiPtype/POWER6+System+Firmware ...

Updating Firmware via HMC hard drive

I'm looking to upgrade the firmware of a p550 via the HMC and noticed that there is an option to do this from the HMC hard drive.Can anyone tell me how you copy the files to the HMC hard drive and location that they need to go to? ...

HMC Commands to Update Firmware

Can anyone provide me with the commands to update/reject firmware of the Managed System from HMC Command Line. We are unable to access the GUI Mode of HMC (WebSM).HMC Model: P5HMC Version: V6 R1.3Server Model: P570 - It is not partitioned. Just a single serverServer OS Version: AIX 5.2 ML 06Permanen ...

Remote Firmware Upgrade( concurrent ) of system p from HMC ?

HiSystem Model: IBM,9117-570Firmware Version: IBM,SF240_284HMC : V6R1.3Upgrade to : SF240_338 I want to perform a concurrent upgrade of the above system to the latest level SF240_338 remotly. I am aware that this can be done with the help of command "updlic",but have never done that. I want to know ...

Firmware Query

I would like to do ML upgrade on one of my (IBM,9133-55A)Power 5+ system.Current OS Level : 5300-04Current Firmware Level : SF240_219and i would like to update to latest ML ie 5300-08Can anyone please help me in knowing whether the current firmware is suitable for doing latest ML update(5300-08) or ...

Firmware upgrade without means to load image onto the machine

I have a p615 (7026-6C3) that posted a 20EE000B error, and the recommendation is to upgrade the firmware to version 080425. I downloaded the image in DOS format, created the four diskettes and came up to the Service Processor Menu. I selected option 1 for Setup, then option 7 for Reprogram Flash EPR ...

Jumping Technology Levels (5.3 TL5 to TL8) and firmware levels

Some of my TLs and Firmaware are severely back-leveled. I want to bring them up to date or as late as they can go for my model 7025-F50. Does the latest TL contain the previous TL fixes and do the latest firmware releases contain all previous firmware fixes? ...

Ubuntu Modem Huawei E160 Problem

I've recently upgraded my Ubuntu to 11.04. My usb modem, huawei E160, worked fine with Ubuntu 10.10 but now it doesn't work with 11.04 anymore. When I stick it in, it doesn't mount by itself. Any suggestions how I can fix this? ...

Seagates ST373307LC HD firmware microcode update issues "not configured to

OS 5.2 004I need to update my Seagates ST373307LC firmware from current is ROS Level and ID............30303038to ROS Level and ID............44533039This diag show for List PCI-X SCSI Disk Array Configurationpdisk0 1S-08-01-5,0 RWProtected Array Candidate 71.9GB Zeroed Download Microcode to a Physi ...

need help updating firmware

Ok, I updated my AIX version to 5.3 tl8 only to find out that it's not supported by my firmware on my model 7028-c64(it spits out an error message "eads-freeze-state?, unknown wordDEFAULT CATCH!, throw-code=ffffffffffffff94 " and then a bunch of stuff about deadbeef, and drops me to a "0 >" boot ...

PowerPC G4 Server open firmware

Greetings All,I've started to pull my hair out trying to install Debian Etch PPC on a PowerPC G4 Server with a SCSI hard drive. The installation goes fine using a cdrom to boot into the intitial install. Then I restart and everything appears to be working until I get to the "second stage boot.. ...

Ubuntu Network Firmware Missing

Ubuntu Forum. I'm a Noob to ubuntu and i have recently installed it on my netbook (Acer Aspire one) and i can connect to the internet using a cable but not Wifi, when i try to connect using wifi it's in grey and says (firmware missing) i dont know what to do. is there a driver i need to install and ...

blade centre H and JS22 firmware update

I am updating firmware on JS22 blades within a Blade Centre H chassis and would like to understand the upgrade path.the current firmware is extremely old and is currenly @ 01EA320_040_030 and I will be upgrading to 01EA340_101_039.I have seen some information that I will need to upgrade to 01EA320_0 ...

I forget my firmware password

Please any one help me, I forget my firmware password and I do not have it, and I can not boot from my mac osx cd and i can not use the single user mode ...

hmc and pseries firmware upgrades

What's the best practice ?Upgrade the HMC firmware before the pSeries or t'other way round ? ...

9112-265 Intellistation Power3 firmware update.

During the firmware update I lost power to the unit.Now have error code on the front panel of 4ba00000, unable to contact Service processor.Is it possible to get hold of the depot level fix procedure for this please, considering this series is not supported anymore. ...

How to obtain old HBA firmware ?

After recent HBA firmware update, I would like to down-grade the firmware back to original, but cannot find the old version available for download.Can anyone provide a pointer or advice for obtaining old HBA firmware?Specifics:HBA 280BDriver df1000faFW 1.91a5 (new)FW 1.90a4 (old) <<<< lo ...

P795 firmware

I am looking for P795 (9119-FHB) system firmware updates however cant see them on fix central.Can someone point me in the right direction please?many ...

I need help to download firmware fo HMC from version 7.3.4 to vervion 7.3.5

All,I need to upgrade my HMC from version 7.3.4 to vervion 7.3.5. The HMC has a Machine type of 7310-CR2 Xseries 335 . Where could I download the firmware for such hardware (HMC Machine type of 7310-CR2 Xseries 335 )? Please answer because I need to upgrade that HMC the HMC to bring to version 7.3.5 ...

Ubuntu Firmware-b43-Installer is behaving erratically, issues installing Java

These kinds of problems have been posted here before, but I assure you I've searched through and I think mine is unique. Read on:So to start, I'm entirely new to Ubuntu and to Linux in general. I'm running meerkat, which I installed off a thumb drive and run on my Dell Inspiron 1525. I activated the ...

Ubuntu Installing Downloaded Firmware

I'm trying to get my TP Link TL-WN821N USB dongle with Atheros ar9170 chipset working. After doing some research, the carl9170 driver gives this device max potential, so I've downloaded the ar9170 firmware before downloading the driver.My question is: now that the firmware package is in downloads, h ...

Ubuntu dpkg: error processing firmware-b43-installer (--configure):

dpkg: error processing firmware-b43-installer (--configure):im having with the above problems..every software that i downloaded/install cant be useplease anyone can help me with this?? im new to this ubuntu world..just a few days using it ...