Ubuntu Hauppauge WinTV MiniStick-HD

Hallo,I am trieing now for some hours already to get my new DVB-T stick to work. Sadly without success.When I enter the command dmesg I receive following output:[ 181.756135] ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 575[ 241.761149] ===>rt_ioctl_giwscan. 9(9) BSS returned, da ...

Ubuntu Hauppauge WinTV-HVR-950

Ubuntu recognizes that I have Hauppauge WinTV-HVR-950. I know that because it lists it as one of my choices for video when I load 'Cheese'.How do I install the software in Ubuntu? Tell me what driver etc I need. Please use very basic terms as I am very new. ...

Hauppauge WinTV-HVR 950Q and ubuntu

Greetings all,I recently purchased a Hauppauge WinTV-HVR 950Q USB TV-tuner (it was a steal). Anywho, from everywhere I searched, this should work well with ubuntu, but I am having no luck. I downloaded and built the lasest files from v4l-dvd.When I type in lsusb this is what I getBus 005 Device 001: ...

Hauppauge WinTV-HVR2250 on Ubuntu Desktop

I'm new to Ubuntu so please be gentle.I used to run Win7 and watched TV using WMC with my WinTV-HVR2250 and it worked perfect. The installation of it under Ubuntu is a nightmare so far. Here is what I did:First I wanted to know if the card is recognized:lspci -v02:00.0 Multimedia controller: Philips ...

Ubuntu hauppauge wintv pvr2 not working

im a newbie to ubuntu and just changed my install from ms xp to ubuntu, im having problem get my tv tuner to work, it is a hauppauge wintv pvr2 i have done following to configure it, enabled the driver in the kernel ( recompile) downloaded and installed the firmware from ivtv my dmesg looks ok [ 10. ...

Ubuntu hauppauge wintv-pvr-150

I had this tv card working with ubuntu 9.04 a while back, and have just put it in my 9.10 pc. lspci doesnt seem to know what it is? and 05:01.0 Non-VGA unclassified device: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01)and the ivtv module also seems to be confuzd about the card. ...

Ubuntu Need Help w/ Hauppauge WinTV 850

I'm a complete beginner with Ubuntu and I'm trying to get my Hauppauge WinTV 850 digital TV tuner installed and working. What I think I need is driver downloads and TV program software. Please assume I know nothing. ...

Ubuntu Hauppauge WinTV device not working

I'm trying to get a PCI TV card working under Ubuntu 9.04. When I run Me TV it give the error message - "There are no available DVB tuner devices"What do I need to do to configure it?lucy@lotus:~$ lspci | grep -i cx03:05.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 P ...

Ubuntu Hauppauge WinTV-HVR-2200 MC compatability

hi, I was wondering if anyone knew if the Hauppauge WinTV-HVR-2200 MC TV card is compatible with ubuntu. Im setting up a htpc and I only have 1 pci-e slot available. any info would be great, ...

Ubuntu Hauppauge WinTV NOVA T Stick Live - remote control

First the good news, I bought Hauppauge WinTV NOVA T Stick Live, Model 353 and it worked immediately and I am able to watch TV using gxine and totem.Now the bad :(, After searching high and low and spending the whole day on trying to get the remote to work, I have given up.The remote is a 35 key rem ...

Ubuntu TV card Problems... atsc channel scan yields no results with Hauppauge WinTV-HVR 1800

I have been at this for about a week now and I can't seem to get past the point where you do the scan for the channel frequencies. I have tried running the scan using 'scan' , kaffeine, and tvtime, and and get no static or channels. I have also upgrade the v4l packs and nothing came of it ...Here is ...

Ubuntu Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40,autodetected]

Here goes my first post so I hope its in the right area.I am try to get my DVB card to work on ubuntu and not getting very far fast.I have tried TVTime and MythTV and dont seem to be able to get anything to work.The following is in /var/log/messages so I presume the OS is seeing the card?Dec 13 13:4 ...

Ubuntu Hauppauge WinTv -NOVA-TD model 1174

I bought a Hauppauge WinTv-NOVA-TD model 1174 USB with diversity technology (two tuners and two antennas). I have Ubuntu 8.10 64-bits installed and the kernel version I'm using is 2.6.27-7-generic. I installed both xawtv and Mithtv but I didn't menage to let the device work.matteo@univac:~$ xawtvThi ...

Ubuntu Install problems - HAUPPAUGE WINTV-GO-FM

(Xubuntu Hardy 8.4)I have been trying to get a proper mythtv or MCE box going for about a month now. I had long ago purchased a crappy external tuner (KWORLD) and I was never able to get that working so I searched around and found a Hauppauge card on ebay that seemed to have some support and promise ...

Ubuntu No sound on Hauppauge WinTV FM PCI card

the main reason i still use windows is that i have no television, and i watch tv on my pc, and i just can't get my tuner card to work in ubuntu.i have been googling for this for several days, only to find similar topics with no solution.i have already tried a lot of things, to no avail.so this forum ...

Ubuntu please help with audio problem from hauppauge wintv go fm card

i got a analogue wintv go with fm card (i think). It has radio for sure, 1x composite-in, audio out, and an IR. I run ubuntu hardy 64bit system. tvtime xawtv etc work without a problem, only i can't adjust the volume from within the applications. I have atm the line out of my tv card connected to th ...

Ubuntu Hauppauge WinTV-Go-Plus not working

I have a Hauppauge WinTV-Go-Plus, but I'm not getting a signal in tvtime. The Mythtv setup is just confusing to me. When I first try running it I go through this database configuration process, and I don't know what I'm doing. Things are working fine in Windows XP using the Hauppauge software, but I ...

Ubuntu Hauppauge WinTV-HVR 1600 and Nvidia GeForce 8500 GT

I am having trouble getting the two cards listed in the title (Hauppauge WinTV-HVR 1600 tv capture card and Nvidia GeForce 8500 GT video card) to work together. I had a fresh install of ubuntu 10.04 on my machine and everything worked flawless without the capture card in it. The x server recognized ...

Ubuntu Hauppauge WINTV-PVR 150MCE-LP TV Tuner

I have a MythBuntu 7.10, an ASUS M2NPV-VM AM2 NVIDIA GeForce 6150 Micro ATX AMD Motherboard and two Hauppauge WINTV-PVR 150MCE-LP TV Tuner cards. The operating system recognizes both cards and can record with each one, however MythTV repeatedly says "Failed to open card" I've seen a lot of ...

Ubuntu Hauppauge WinTV-Go (cx88 chipset)

Hi. I bought the Hauppauge WinTV-Go TV tuner card a few days ago. I installed it under Windows and it worked perfectly. I also heard that this card worked perfectly under Ubuntu, though that has yet to be the case so far. I can only watch the last channel I tuned into under Windows.I've searched the ...

Ubuntu Is the Hauppauge WinTV PVR 150mce compatible with ?

Is the Hauppauge WinTV PVR 150mce Tv tuner/video input adapter compatible with ubuntu 7.1? I've checked the lists and couldn't find it anywhere. ...

Ubuntu Hauppauge WinTV-PVR-USB2

Does anyone know how to get the Hauppauge WinTV-PVR-USB2 working yet? It is in the 2.6.18.1 kernel. I am using this kernel with Ubuntu 6.10. What else do I have to do to get it to work? ...

Ubuntu Hauppauge WinTV PVR - No Sound ..

i have a Hauppauge WinTV PVR running under Ubuntu. All works perfect with tvtime, but i dont get any sound out of the TV Card =(Im using a cable between the lineout of the TV-Card to the Line-In of the soundcard but it dont works (on the windows xp system the cable/sound and the tv card work).Any Ti ...

Ubuntu Help with Hauppauge WinTV Nova-T stick Model 1185 ID 2040:7070

Good Morning,I've just got a new PC and hope to build a MythTV system. I had the thing 20 mins and blew away MS Vista that came with it. (cant test the card in Vista, doh!)Now running Ubuntu Hardy Herron with all latest updates;user01@server04:~$ uname -aLinux server04 2.6.24-16-generic #1 SMP Thu A ...

Ubuntu view a video stream from the Hauppauge WinTV-PVR-350 over the LAN

On a Fedora PC, I have a Hauppauge WinTV-PVR-350 PCI card.The S-Video and Line-In audio of this 350 card are connected to a camcorder.On the same LAN, I have a Ubuntu 7.10 Desktop system.Can I use mplayer/VLC on this Ubuntu system to view the video stream from the Hauppauge WinTV-PVR-350 over the LA ...

Ubuntu Installing a Hauppauge WinTV-PVR 150 (no video)

I got a Hauppauge WinTV-PVR 150 for Chirstmas, so that I could play my PS2 on the PC and not hog up the TV. The only problem is I'm having trouble getting it to work.Here's the steps I've followed so far:1) Remove my old KWorld video capture card (which doesn't work with linux)2) Place the Hauppauge ...

Ubuntu Problems installing Hauppauge WinTV Nova-T 500 PCI on gutsy 7.10

I am a real beginner with Ubuntu and am struggling to install my Hauppauge WinTV Nova-T 500 PCI card. I have followed the instructions on http://www.mythtv.org/wiki/index.php/Hauppauge_WinTV_Nova-T_500_PCI to the letter, but at the end when I use the command: sudo modprobe dvb-usb-dib0700 all I see ...

Ubuntu Hauppauge WinTV 2000 Install

To get a WinTV 2000 TV Card Working in Ubuntu 7.10Site used for reference:http://www.linuxtv.org/v4lwiki/index.php/Leadtek_WinFast_2000lspci01:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)01:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture ...

Ubuntu Help! Cannot use Hauppauge WinTV PVR-350 ?

I have installed a Hauppauge WinTV PVR-350 in my system but I cannot use it with either tvtime or kdetv.I am running Feisty because Edgy did not install on my Intel motherboard (worked fine with Suse and and now Feisty).I have looked at the instructions at https://help.ubuntu.com/community/Install_I ...

Ubuntu Help using mplayer for watching tv using Hauppauge WinTV PVR-150 card

HiA few months ago I installed a Hauppauge WinTV PVR-150 card (cx23416 based) on my 64-bit Athlon Kubuntu Edgy installation. I initially didn't get it to 'work' and left it a bit, but came back to it recently. I'm using ivtv version 0.7.0 and I register no problems using 'dmesg'. I followed the upda ...

Ubuntu IVTV problem with Hauppauge WinTV XP

Ivtv problem with Hauppauge Win TV XPIvtv doesn't load anything so MythTV doesn't work.Can anyone help me?I have a Hauppauge WinTV XP card and MythTV, but I don't get any TV reception. MythTV does work otherwise. With tvtime I get a very bad picture and no sound, mostly black and white. The remote w ...

Ubuntu What software to capture Hi-8 with Hauppauge WinTV PVR USB2?

I am a novice in the world of video and Linux, too.I am looking for software with a GUI which would enable me to capture my Hi-8 cassettes with a minimum of hassle.On the basis of what I read on various forums, I bought a Hauppauge WinTV PVR USB2 device, thinking it would work well with Ubuntu.Now I ...

Ubuntu Need help withHelp with Hauppauge WinTV NOVA-T USB2

I'm pretty new to Ubuntu and Mythbuntu. I've installed Mythbuntu 9.10 on my Acer Revo and have been trying to get the above USB capture card to work. I'm in the UK.From this link, I've established that there's two versions of the card. I have the older one. http://www.mythtv.org/wiki/Hauppauge_WinTV ...

Ubuntu Hauppauge WinTV NovaT500 Jaunty 64 bit

HOWTO:Getting the Hauppauge WinTV Nova-T 500 working properly with Mythbuntu 9.04 64-bitThis is a list of what I did to get my Hauppauge winTV Nova-T PCI 500 dual tuner card working with Mythbuntu 9.04.I am hoping that will prove useful to others in the same predicament!You can cut and paste the com ...

Ubuntu Hauppauge WinTV-NOVA-HD-S2

I haven't really had much luck with my Mythbuntu pc, so I am hoping to get some help.I have just added a Hauppauge WinTV-NOVA-HD-S2 card to my shuttle pc, which is running mythbuntu 8.10.My card was working fine, until I upgraded to 8.10.I dont want to be reinstalling an older version, because over ...

Ubuntu Hauppauge WinTV-HVR 1800

Hello, I am a relative newbie to Ubuntu and Mythbuntu. I recently upgraded my computer so that I can use it as a DVR. I have run into some issues and need guidance.I have a Hauppauge WinTV-HVR 1800 and an Nvidia GeForce 7150/nForce 630i motherboard. I installed Mythbuntu 8.04, got all my NVidia driv ...

HOWTO: Setting up Hauppauge WinTV-PVR-USB2 on Ubuntu 6.10 (Edgy Eft)

EDIT: With Ubuntu 7.04 it works out-of-the-box !!Here is a simple guide for those of you who wants to use your Hauppauge WinTV-PVR-USB2 (an external MPEG2 tuner) on Ubuntu 6.10 (Edgy Eft). This will allow you to use e.g. MythTV.Hauppauge WinTV-PVR-USB2 needs a driver and the driver needs a copy of t ...

Ubuntu Help with "Hauppauge! WinTV-HVR H006" TV Card

everone I have a Hauppauge! WinTV-HVR H006 (USB Dongle) that I want to get working with Ubuntu 9.04. Can anyone point me in the right direction regarding an Ubuntu driver and Ubuntu TV Viewer (pref Gnome and Non-Java)software for this? ...

Hauppauge WinTV-PVR-USB2 not recognized in Ubuntu Guest

I am running Ubuntu 10.10 with a KVM guest running mythbuntu 10.10. I am trying to get USB passs through to work. I have been able to successfully pass through a USB thumb drive and format/mount it in the guest. It is not automatically mounted when I boot the guest. I now am trying to do the same fo ...

Ubuntu Hauppauge WinTV IR modules broken in Natty? Previously working in 10.10.

Similar to many out there, I am having problems with Natty AMD64 (Ubuntu 11.04) and LIRC/IR-Keytables.I have a Hauppauge WinTV card (Bt878) (TV card and IR receiver/transmitter) that worked (for the first time) automatically with 10.04 and LIRC. I recently moved over to 11.04, copied my LIRC config ...

Ubuntu Hauppauge WinTV-DCR-2650 project. Advise?

Greetings.First I should say that I'm new to this game. I've been using Ubuntu for some time, but I'm not any kind of a nuts and bolts OS wizard.I'm beginning the process of specing out a new PVR system. I'd appreciate input from some of you who are well versed in this area.This is what I propose.OS ...

Ubuntu Hauppauge WinTv-HD-S2 Multiple Cards

Help - Have a really odd problem trying to use two Hauppauge WinTv-HD-S2 cardsBrief History & Background:Had Mythbuntu box running Server and Frontend (10.04)This box had 2 PCI Wintv-Nova 500's - worked fine had 3 real receiver's setup for 4 virtual cards.H/W Asrock M3A790GMH/128M + 4GB + Nvidia ...

Ubuntu Hauppauge WinTV HVR-1600

I am running 10.04. I would like to know if this OS can be used to watch tv using my Hauppauge WinTV HVR-1600 NTSC/ATSC/QAM Combo. Where I want to use this I have standard cable service from TW (not digital cable). I also would like to get an HDTV antenna to see some over the air HDTV. I see that Ka ...

Ubuntu Hauppauge WinTV-NOVA-HD S2 and Antec Fusion (IMON)

I have mythbuntu 9.04 running on an Antec Fusion with the IMON Soundgraph LCD and IR receiver.I've had the LCD and remote running for about a year, but I've finally got sick with having to move across the room to get the receiver to pick up the remote signal. I've just bought a Hauppauge WinTV-NOVA- ...

Ubuntu Hauppauge WinTV PVR-150 How-To

This is a little write up on my experience getting a Hauppage PVR150 that I bought off of Craigslist up and running. I know this is old hat but I still fumbled a bit and figured this still might help somebody.The little guy has the family of Conexant chips that has a driver developed for it over at ...

Ubuntu Hauppauge WinTV Nova-T 500 PCI.

I have a dell dimension 8400 running Jaunty 9.04, fitted with a Hauppauge WinTV Nova-T 500 PCI. When I start me tv the scan wizard appears with DiBcom 3000MC/P advised as the device and scan by location selected, but both select your country and region are greyed out.I have followed http://www.mytht ...

Ubuntu hauppauge wintv 150 how do i set the aspect ratio?

im using a hauppauge wintv 150 with moovida to watch video from my sky box, and the video is stuck at 4:3 how do i change the aspect ratio to 16:9 ...

Ubuntu trying to add a Hauppauge WinTV-HVR1250

I bought a 2nd tuner card...Hauppauge WinTV-HVR1250 to try and get the over the air HD channels. As you can see from the output below it seems that the computer sees both the new and old card. I've tried some different things I found from searching but I can't get mplayer or vlc to play it much less ...

Ubuntu Mythbuntu 8.10 w/ Hauppauge WinTV Go

This article is designed to help those who are setting up Mythbuntu with a Hauppauge WinTV Go card and are having problems getting audio off the card.Background:This has not been a smooth road. This is the the fourth mythbuntu box I have built and all but 1 were somewhat difficult.The latest is a ba ...

Ubuntu Hauppauge WinTV NOVA-TD Dual DVB-T - Mythbuntu remote

I have just installed my new Asus eee box with Mythbuntu. So far most things are working well, although I am having problems with the remote control.System config -Mythbuntu 8.10USB - Hauppauge WinTV NOVA-TD Dual DVB-Tdmesg | grep dvb[ 15.448264] dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in ...