I am attempting to install 7.10. I get caldera dr-dos 7.03 start up instead. Nothing I have done fixes this, gets it to move on to install. This has happened with both desktop versions, i tried the other one thinking maybe i downloaded the wrong one. ...
I just copied Ubuntu ISO to a CD - and you all might laugh at me, but Ubuntu boots to DOS - how do I navigate to install Ubuntu? ...
I have a box running DOS 7.10 ( i know, microsoft stopped making dos @ 6.22, Its great, has large disk suppor, FAT32, >64MB memory support, its sweet, check it out ITS FREE!!!My problem, I have an SMC EZ Card 10 PCI NIC (SMC1208)Compaq (sucks) 225mhz, 128MB.DOS 7.10 (above)Arachne Web Browser for ...
I've downloaded the Ubuntu 7.03 and I installed it over 3 different PCs (2 normal PCs and 1 Sony Vaio)... But I have a friend who downloaded the same distribution and tried to run it over a Compaq PCModel: Compaq SR1215LAProcessor: Intel(R) Celeron(R) CPU 2.66 GHzMemory (RAM): 248 MBThe problem is, ...
Hi, I have managed to squeeze ubuntu 6.10 onto an old dell laptop with 128meg ram. It works fine. My question is whether I should upgrade to 7.03. Is 7.03 going to demand more ram resources from my already hard working computer? ...
I tried to use the bootable cd to try Ubuntu OS. It seems loads up then It gets as far as Caldera DR-DOS 7.03 [DR-DOS] A:\> and stops. What do I do? What other prompts should I be aware of? ...
Greetings forum members. This is my first post. I've searched but not found the answer to this. Any help would ease my headache.....so, in order to get my penguin feet wet I made an Ubuntu (v.6.10-desktop-i386) and a Freespire (v.1.0.13) bootable disc via Nero at 4x and ran the iso files through the ...
I have a intel dg33tl motherboard with an e 6300 pentium processor, both of which support 64 bit architecture. However, when I insert a 64 bit ubuntu iso I and try to boot from the disk, I am rerouted to Caldara DR-DOS 7.03. In DOS I am unable to execute any actions because it will not register my U ...
I've got a situation atm which means that i can't get into the bios to change the boot sequence so that cdrom will boot before hdd.Basicly what i need to do is to go into a command prompt (f8 at boot on xp pro sp2) and then get the ubuntu live cd to boot.I'm not fussed about which version i have but ...
I see that Wine has the CMD.EXE program. However, when I try to run it with Wine, nothing happens.Is it possible to open a DOS command window under Wine, so that I can run an ancient DOS program? ...
I have completed a dos utility combined with WATCOM C & dos extender dos32a and it works in ms-dos.But now I was asked to provide the version which works in xp command prompt.The original program works in xp command prompt with any change ? ...
I have updated my system with 7.10 but after update and reconfigure X the keyboard does not work? except for some swedish letter keys and that is 'ä' and 'ö'?? someone who knows what is the problem and how dot correct it?? xorg.conf file? ...
In the past, running SUSE or Red Hat Linux, I could copy files easily between Linux and Windows systems using a memory card. If I needed background pictures on my Linux server - copy files to a memory card from Windows and SUSE and Red Hat saw the files.Now I've added a Debian server. I have graphic ...
HiI just installed Ubuntu server and followed a tut to install vmware server. When i try to start vmware server from /usr/bin i get "error while loading shared libraries: libx11.so.6: cannot open shared object file: no such file or dirThis is a request for a gui??I would like to stay command ba ...
Ok I need someone out there who is a Calder DR DOS expert!!I am trying to install Windows XP on a hard drive that has nothing on it. I have the motherboard set to boot from the CD ROM, but when it comes to that point, it bypasses the CD ROM drive and starts a program called Caldera DR DOS 7.03. Sinc ...
Im not exactly sure what im doing. I wanted to try something new cause im sick of Windows XP Home and Professional. But anyways. I downloaded the disk images and then I burned them to a disk using Nero. I burned them as a Boot Disk. Then I go put it in my other computer cause I wanna test this softw ...
We have a second computer with a IBM 12.5G hard drive that we want to setup as a multi-boot system. (I've installed one before with Windows NT and Linux using lilo)Caldera DR-DOS 7.03Windows NT 4.0Debian Linux. How would YOU partition the HD? Would you use a Separate Partition for the DrDos OS, .... ...
I downloaded Ubuntu 6.606 and burned the ISO file to a CD. If I try to boot from the CD, the screen stops with "[DR-DOS] A:\>" at the bottom. Two line above that: Caldera DR-DOS 7.03. If I enter dir, I see an executable file named WWBMU. If I type it at the prompt, I get a message sayin ...
I am very new to this Ubuntu 5.10I've managed to cut a copy of the above and get it restarted, but I am stuck before I got to Initial splash screen.I got stuck here:"CALDERA DR DOS 7.03COPY RIGHT (C) 1976, 1988 CALDERA, INC, ALL RIGHTS RESERVED[DR-DOS] A:\>"Appreciate all your help. ...
I'm a complete Linux newbie. However, I've been reading for quite some time and have decided to do the dual boot thing with Ubuntu and XP. I downloaded the ubuntu-7.04-desktop-i386.iso and checked it with MD5summer and it passed. The issue is that when I reboot with the CD in the drive I end up with ...
First time with Linux. Install will not go past NLSFUNC.Distro: 7.1 XP Pro on diskSingle PartitionIntel 566192 Mb RAMSony cdr/rw 48xfollowingis partial screen output:Partition C:\ installedSearching for USB HDD devices...USB support sucessfully initializedrun-time error R6001-null pointer assignment ...
I downloaded the alternate install CD for Dapper Drake and burned a bootable .iso CD. When I boot from the CD, I get a Caldera DR-DOS 7.03 command prompt with [DR-DOS] A:\>. How do I get to the text based installer? ...
Ok, new problem.Last night, I decided to upgrade the 10.04 in my laptop to 10.10. To make a long story short, after doing the upgrade, it all went to hell.So I decided to install Lubuntu 11.04. After downloading the torrent without a problem, and extracting the ISO file, I burned the CD on K3B. But ...
I have a property active to indicate status of an employee. Along with all the details, i extract the details from an employee table into a dataset, but however i am not able to get the value present in active as i get an invalid cast exception.This is the property declaration.P rivate Active As Sql ...
I already have XP and DOS 7.1 dual boot system.If I install Red Hat Linux 9 now on my system.. will it put both XP and DOS in GRUB? ...
I am a network engineer trying to assist a user who is an Oracle developler. When he is using sqlldr.exe, it appears to run fine until its ready to finish, then he gets a Dr. Watson error. The Dr.Waton error SQLLDR.EXE access violation 0xc0000005 / 0x6060ee18 occurs at the end of processing incoming ...
How do you do.I am trying to create a DOS 7.10 (http://ms-dos7.hit.bg/) Virtual Machine using the VirtualBox OSE software.I created a hard disk, and pointed VB to the setup ISO. I chose the option to install DOS, and it went fine (created a partition and everything) and rebooted. Now, when I go into ...
I know it's a windoze problem. I was going to make a backup image by ghost 2003 but it stucked at the PC-DOS 7.0 screen and won't boot. Now I can't get into Windows. Here is what it says:The previous operation has failed. Please enter the number of the action you wish to take:[1] Exit to Dos.[2] ret ...
I have an older laptop that is not capable of booting from CD or USB; only from its external diskette drive or internal hard drive. It is formatted FAT and running only DOS 7. I have installed the necessary drivers and can access its external PCMCIA CD drive via command line.The CD drive can read th ...
I have two harddisks in my computer.The first of them containing: DOS 6.22, Win98SE und another different Win98SE.All of them were installed on their own partition (C:). Two of these partitions were always invisible, the third visible and active for booting the system. Using another system I had to ...
How to create a MS-DOS virtual machine step by stepby searchThis is an Ubuntu Forums (http://ubuntuforums.org/) HowTo guide.What this thread is aboutVirtual machinesDownloading files and installing necessary softwareMaking a virtual hard diskInstalling the systemRunning the systemRunning the systemM ...
Have you ever noticed that Gordon Freeman is Dr. House? If they ever make a movie, Hugh Laurie had better play that part.http://gamesnet.vo.llnwd.net/o1/gamestar/objects/195787_main.jpghttp://rooktopia.files.wordpress.com/2008/03/dr-house-season-3-rd-4.jpg ...
Out of ignorance, I ask anyone:How does one boot up in DOS--not running MS-DOS through Windows--as I am upgrading my BIOS and this AFUDOS application (run off a floppy, which I've made, set first boot device to the floppy, etc... anything off the ASUS support site) doesn't seem to start. The message ...
I tried the new DR Release of the DB2 .NET Provider today. The Connection to our Test-Database (DB2Express on Windows) was ok. The Connection to the Production-System (DB2/VSE) caused a dump on the server and the following error:ERROR 58017 IBM SQL30073N "0x11A2" Parameter value "0x0000" is not supp ...
I have been makinig changes to the structure of my siteI have also upgraded php from 4.1.1 to 4.3.11 todayThis is the error im getting:Dr Watson Fatal Error:Dr Watson was unable to attach to the process. It is possible that the process exited before Dr Watson could attach to it.Windows 2000 returned ...
We are planning to build DR (Disaster Recovery) for our document management solution. We are using IS 4.0 with HPII and Centera.We’d like to utilize DR server rather than sitting it ideal. Does anyone have DR site and using DR server for any other purpose? We are thinking to use DR server as non-p ...
Is there a way to access the underlying DOS or exit to DOS, if Linux was loaded from Loadlin? ...
I wrote a program(VC++6.0 Dialog) that opens a DOS-Window (Starting a dos software) The DOS Software needs CTRL-C to close! No other thing is accepted. My question:How:-do i set the focus to the dos window?-do i sent the combination CTRL-C? ...
For best results, you should always use an OS-specific partition table program. For example, you should make DOS partitions with the DOS FDISK program and Linux partitions with the Linux fdisk or Linux cfdiskprogram.I'm reading the fdisk man pages and it says there is a DOS fdisk program. What is it ...
In my MFC program I run an external DOS program in a DOS box. The DOS program waits for the user to press a key and then exits after outputting a few lines of text. I would like to know if there is any way I can get the output of this simple DOS program to be redirected into a control (maybe Activex ...
Im running Windows 98SE, Apache 1.3.12 Win32 and php-4.0.2-Win32I am trying to make some ping-scripts i php :<?php$tmp = exec("ping 127.0.0.1"); echo $tmp;?>also tryed the following :<?php$tmp = exec("ping 127.0.0.1", $ping_results); $rows = count($ping_results);$ping = ...
I want to write a windows frontend for a DOS tool.So I call the DOS app and the DOS box pops up.Then I have to wait until it has finishedbefore I can proceed. But how do I know?I tried to use FindWindow() and look periodicallyfor a window title with my DOS application name.But that is e.g. different ...
If I launch a DOS program, and the DOS program then sends output to the window/consloe, how can I intercept the message in my program ?Im a rookie in this area so any advice directionwill be helpful (code gets you on my 'owe you a beer list')dd ...
I have an avi file that I would like to play in DOS (screen switch to dos and play avi then switch back to Windows when finished). Does anyone know how to do this. I've seen it done in raytrace demos. ...
I want to call dos utility in my main program which based on Windows. For example, I use "CreateProcess" to call the dos utility "move.exe".I use the following code in order to not let the dos window show:stStartUpInfo.dwFlags = STARTF_USESHOWWINDOW;stStartUpInfo.wShowWindow = SW ...
I am a newbie. I need some advice in running a dos program. The program and directory is on a ubuntu server (8.04) with samba. I am trying to access it on an ubuntu desktop (8.04). How do I map the network directory as a drive (like window) permanently and run the dos program in an dos emulator of s ...
I have encountered a problem and I would like to have helps and hints. My application will launch a DOS program and this DOS program will be running on the background. However, this DOS program will output some information to it's console and my application will need to display it simultaneously, wh ...
All DOS programs in NT represented as NTVDM processes. How can I find out to which DOS program corresponds each DOS NTVDM? ...
I am using code below to launch my application. If lauched application is DOS based then a dos window appears. What i have to do for hide dos window.Private Type STARTUPINFOcb As LonglpReserved As StringlpDesktop As StringlpTitle As StringdwX As LongdwY As LongdwXSize As LongdwYSize As LongdwXCountC ...
How do I open a dos window,give two dos commands one after the other,then close that dos window. ...