Oracle rman duplicate target for standby, standby redo not created on standby side

I was trying to use rman to create a physical standby database. Our database version is 10.2.0.4

Here is the rman script.
run{
Allocate auxiliary channel aux2 device type disk;
duplicate target database for standby dorecover.
}

The standby redo logs were created in primary database before the rman duplicate command. But after the rman duplicate command finished, standby redo log files were not created on the standby host, although v$logfile and v$standby_log in the standby database list them. The log_file_name_convert and db_file_name_convert parameters were set in the standby database.

I searched metalink and found this is a bug on 9.1 and fixed in 9.2. I googled and found couple of notes that show the same problem, but did not see an real answer. Most the article and document I found say the standby redo log will be automatically created by rman when you do duplicate target database for standby. I know I can just drop the standby redo log groups on standby, then recreate them. But I really like to know what other people experience. I’m afraid I’m making some mistake in my create standby process.

Oracle RMAN duplicate target database error

I’m trying to use RMAN ‘duplicate target from active database’ to a remote host however I’m getting a confusing error:RMAN-00571: ===========================================================RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============RMAN-00571: ==================== ...

Oracle RMAN duplicate target database from active database - performance problem

Hello. I’m running into a major performance problem when trying to duplicate a database from a target located inside our firewall to an auxiliary located outside our firewall. Both target and auxiliary are located in the same equipment room just on different subnets. Previously I had the auxiliary ...

Oracle RMAN duplicate target using set until telling me it can not find data files

I have RMAN scripts that I use freqently to clone a database from DB (production) to another (non-prod). These work just fine. I use the set until so that I can tell it at what point I want the new DB to be created from the backups of the source.I had a request to go back a few weeks and the backup ...

Oracle RMAN Duplicate for standby: ORA-01180: can not create datafile 1

I am trying the "duplicate .. for standby" in oracle 10.1.0 (RedHat EL3 AS)I have the primary and standby on the same host.1, created init.ora files for both primary and secondary with appropriate filename_convert, service names etcsecondary params: db_unique_name=devsdb_file_name_convert='/u02/orad ...

Oracle RMAN Duplicate DB fails to restore datafile created during backup.

Database is 9i.Performing duplicate database using rman on seperate host. Reason of failure is , there were datafiles created during backup. Question is , Is there a workaround to perform duplicate database to work.Error :released channel: aux1RMAN-00571: ============================================ ...

Oracle Rman Duplicate/Clone/restore db without target db availability

i would like to know whether i can clone, duplicate a db from the following information i have,1) my target db & server are down, 2) DBID not known3) no catalog info.i don't ahve any backup logs taken during rman backup through which i can get db info, as catalog resides on the same server4)back ...

Oracle RMAN deletes archivelogs not yet applied to standby

I have a problem where my physical standby database becomes out of sync with primary. When there is a log gap and fal tries to get the missing archivelog from primary, it cannot because it has been deleted by RMAN.The Oracle version im using is 10.2.0.4 on SuSE linux sles9 64bit.Using an RMAN reposi ...

Oracle RMAN deletes archived logs not shipped to standby

9.2.0.6 dataguard configuration with physical standby.I do RMAN backups on PRIMARY using "backup database plus archivelog delete input". I notice that RMAN will delete the logs even though they are not shipped to the standby site - leaving the standby database pretty useless. I've worked with datagu ...

Oracle go back in time in rman duplicate target db w/ no restart of process

i am on 10.2.0.3.I have a DB1 and server1 and db2 and server2.We needed to refresh db2 from db1. So i use the rman duplicate target DB cmd. and that ran fine. But my question isi used the logseq =121212(which is till may 19). But we need to actually do this sowe are up until may15 and not may19. So ...

Oracle RMAN duplicate database suddenly slow

I used RMAN to duplicate database to different box in the same local network area. Here are the scenario:boxA: target database (PROD) -- 250Gdatabase:Oracle 10g Enterprise Edition Release 10.2.0.3.0 - 64bit ProductionOS:Windows Server 2003 Enterprise x64 EditionboxB: cloned database database:Oracle ...

ORA-17629:Cannot connect to the remote database server while RMAN duplicate target

I'm trying to use RMAN 11g to duplicate a database and then set up Data Guard.RMAN> connect auxiliary sys/***@orarman11ccbstbconnected to auxiliary database: RMANCCB (not mounted)(this database is in nomount state)RMAN> duplicate target database for standby from active database dorecover nofil ...

Oracle RMAN / DUPLICATE DATABASE

Would someone please point me in the right direction in the creation of this duplicate database? The documentation is so generic it becomes confusing. At one point they say to modify the init.ora parameter of the prod db and later on an auxilary instance needs to be started. May be someone out there ...

Oracle Rman Duplicate database synchronization problem

really nobody knows about that!!!!!!!! ...

Oracle Rman Duplicate database synchronization problem

HiI have the Oracle database 9.2.0.1.0 .I've created Duplicate database on another computer with the same structure and Oracle 9.2.0.1.0 too.Now, I want to synchronize my duplicate by primary database, and I copied backup of all datafiles & archive logs & and backup that was taken by RMAN, b ...

Oracle RMAN duplicate cross platform

Would RMAN's command 'duplicate' work if target database is in windows and auxilary instance is in linux. Hardware remains the same. If not, what would be the alternamtive? ...

Oracle Rman + duplicate db

I'm trying to create duplicate db using rman. But I got following error message:RMAN> duplicate target database to testerdb;Starting Duplicate Db at 27-OCT-04using target database controlfile instead of recovery catalogallocated channel: ORA_AUX_DISK_1channel ORA_AUX_DISK_1: sid=9 devtype=DISKRMA ...

Oracle RMAN duplicate db Standard Edition

As many of you know, Oracle Standard Edition license allows only one channel for RMAN. Given this restriction, is it still possible to perform database duplication using RMAN? I read that you need at least an auxiliary channel. Please comment... ...

Oracle RMAN duplicate database without primary database ?

Is there a way to duplicate database in RMAN without connecting to the primary database ?Our scenario is we need to be able to restore a backup set taken from the production server to another server with a different directory structure - without connection to the production server(assuming it's down ...

Oracle RMAN > connect target /@XE not possible?

I tried something (Backup/recovery) with RMAN on XE successfully.Now I have to use:RMAN Target SYS/pwd@XE nocatalog and got:RMAN-00554: initialization of internal recovery manager package failedRMAN-04005: error from target database:ORA-12170: TNS:Connect timeout occurredsame error on using:RMAN> ...

Oracle Rman duplicate with error occur in create controlfile

I try to duplicate one of my oracle to another db server, I backup the target database with controlfile, and start the new db server instance with nomount option, and start Rman and execute the command 'duplicate target database to newdb" (newdb is the instance name of my new db server), everything ...

Oracle RMAN duplicate database and eventual backups

trying to get my feet wet with the nitty-gritty details of RMAN.I do have difficulty understanding how RMAN concepts match with the "classic" old way. Here's my scenario: two servers, s1 and s2. On s1, I have a production database, s2 does not currently have a database on it. I would now like to cre ...

Oracle RMAN Duplicate (ASM to NON-ASM)

I´m trying to make a duplicate of a db with RMAN, I already made a full backup plus archivelog of the target db, now I need to copy this backup to the aux db, the problem is that I can´t copy the backup to the same directory as the target db because in the target I have ASM and in the aux I use li ...

Oracle RMAN Duplicate Database to existing DB.

Here is my scenario. I would like to use RMAN duplicate to go from DBA to DBB on another host. DBB is an existing DB that I basically would like to refresh. Since it is existing all datafiles already exist. I am using ASM also.So if I use duplicate do I have to delete all existing files in the data ...

Oracle rman duplicate

Mine's Oracle10g on Windows Server 2003. Yesterday, I was trying to create a duplicate database using rman. I got this error message:channel ORA_AUX_DISK_1: reading from backup piece F:\BACKUP2IJGT6J_1_1.BKPORA-19870: error reading backup piece F:\BACKUP2IJGT6J_1_1.BKPORA-19504: failed to create fil ...

Oracle Rman duplicate

Is it possible to duplicate target database to auxiliary on diferent OS with rman ?For example oracle 10g r2 on Windows2000 to Linux .? Or platforms and d.b. versions must be the same ? ...

Oracle RMAN Duplicate Question

I'm on 9i on Microsoft Windows Server 2003.At the moment I'm duplicating a Database from 1 server to another.I have the following line in the target INIT file.*.db_file_name_convert = ('E:\oracle\oradata\RASS', 'E:\oracle\oradata\RASSB')I wish to store 1 of the TABLESPACES to the D: Instaed of the E ...

Oracle RMAN Duplicate with RAC on ASM

I have a RAC database in NoArchivelog Mode on HOST A using ASM.I would like to create a duplicate RAC database on HOST B again using ASM.I have decided to go ahead with RMAN duplicate (As it seems to be the only option).Any idea of what is exact procedure to do it. ...

Oracle RMAN Duplicate Database 9.2.0.5 between SLES 8 <-> SLES 9 OS?

is it possible to duplicate a Database 9.2.0.5 from a SUSE SLES 8 Server (Kernel 2.4 ) to a SLES 9 Server (Kernel 2.6)?THX Thomas ...

Oracle RMAN Duplicate Database

We have RMAN backup for Oracle 9i.Can we create duplicate 10g database using this 9i backup ...