Oracle DBCA Fails at 85%

I am trying to install Oracle 10.2 on Solaris 11/06 x86-64. The actual installation of the software goes off without any problems. During the installation check, all prerequisites are found, and no errors occur during the software installation.

However, when I attempt to run DBCA (even when just doing a general database and accepting all the defaults), DBCA hangs at 85%, then promptly exits. In the log file (emConfig.log), the following error below is recorded.

Has anyone successfully installed Oracle 10.2 (x86-64) on Solaris 11/06 x86-64?

Thank-you.

===========

CONFIG: Oracle Enterprise Manager 10g Database Control Release 10.2.0.2.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://db0.terida.net:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ............................................
................................................. failed.
Logs are generated in directory /u01/oracle/10.2/db0/db0.terida.net_db0/sysman/log

Mar 23, 2007 3:08:46 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /u01/oracle/10.2/db0/bin/emctl start dbconsole
Mar 23, 2007 3:08:46 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /u01/oracle/10.2/db0/cfgtoollogs/dbca/db0/emConfig.log for more details.
Mar 23, 2007 3:08:46 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:572)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:184)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:153)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:155)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
at java.lang.Thread.run(Thread.java:534)

===========

Oracle DBCA fails with 10g RAC installation

hiI have installed CRS on a 2 node RHEL3.0 cluster. The CRS daemons are up and running and CRS install does not report an error. The ORacle 10g installation also goes thru but the DBCA failsIt Says"PRKS-1011:Failed to check status of ASM instance "+ASM1" on node "node1",[CRS-0210:Could not find reso ...

Oracle DBCA fails

I post this under installation section, but im in a hurry so ill paste this here also:If anyone could help on this id appriciate that very much.So , i have 9iR2 db on Win 2000, i want to remove that db but when i start dbca from start menu, nothing happens. Then i tryed starting it from command prom ...

Oracle DBCA fails

If anyone could help on this id appriciate that very much.So , i have 9iR2 db on Win 2000, i want to remove that db but when i start dbca from start menu, nothing happens. Then i tryed starting it from command promt and typed dbca from D:\oracle\ora92\bin and i got this messages :Exception in thread ...

Oracle dbca fails

Oracle 9.2.0.6HP-UX 11.23/oracle/OraHome1/bin:<PPCI> dbcaException in thread "main" java.lang.NullPointerExceptionat oracle.sysman.assistants.dbca.ui.DBCAWizard.<init>(DBCAWizard.java:329)at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:194)at oracle.sysman.assistants. ...

Oracle dbca fails with Hummingbird using 10.2.0.4

All-- We have used dbca with puTTY and Hummingbird for years to create databases on Solaris, but now receive an Xserver error that closes the Hummingbird window on the confirmation page when using dbca on Solaris10 with Oracle 10.2.0.4. Note that dbca completes successfully when we comment out our L ...

Oracle DBCA Fails with error accessing inventory - OEL5.3 DB11g SE install

We're trying to install ODB11g for x86_64 on a OEL5.3 and after having prep'd the environment, kernel, etc... The oracle user runs the runInstaller script, everything passes with flying colors until... the DBCA when in the step of completeing "Database Creation" gives an error which is logged in the ...

Oracle dbca fails

i am doing database createion on 11gR2 on solaris 10 and i got this mesage while defining SID: "The Oracle system identifier(SID) "test" already exists. Specifiy another SID.Before that my dbca failed when got to 4%, i don't know why, and now i can't select the same SID. ...

Oracle DBCA fails with 11g r2 on HP-UX V3

I successfully installed the Oracle Database 11g r2 software on HP-UX V3 but when I'm trying to create database through DBCA it is stuck before starting the database creation without giving any error (when i click on the finish button in dbca after giving all the parameters).DBCA log file says : PRC ...

Oracle DBCA fails during EM R2 installation

EM 10R2 installation on AIX5.3During the db creation DBCA reports:ORA-00444: background process "MMON" failed while starting ORA-00445: background process "" did not start after seconds Note:18443.1Error: ORA 444 Text: background process <name> failed while starting Cause: This message is usua ...

Oracle 9.0.1 create database using dbca fails

Solaris 8, 64-bit SPARC, 528mb RAM, 2 SCSI 9gig. Development box with no other users/processes running except Sendmail.Installed Oracle 9.0.1 on machine from CDs with no problems, Attempting to create database using Database Configuration Assistant.Creating 'general purpose' database using dbca with ...

Oracle 9.0.1.1.1 DBCA fails with ORA-01017

I've just downloaded Oracle9i 9.0.1.1.1 from OTN and have attempted to install it on my Win XP Pro machine. Everything seems to progress fine until the DBCA starts up, at which time I eventually get an error: "ORA-01017: invalid username/password; login denied" and the DBCA fails.Has anybody seen th ...

Oracle 9ir2 dbca fails on Mandrake 8.1

Installation completes just fine. Everytime I run the ca, it fails at 53% with end-of-channel-communication error. I had 9.0.1 running perfectly on this same machine. ...

Oracle 9ir2 on Debian Woody installation hints (when dbca fails)

"Woody" is the soon-to-be-released Debian 3.0, and contains glibc 2.2.5. The current 'stable' Debian release, Potato, has glibc2.1, so that won't work. The installation went fairly smooth, until the configuration assistants were supposed to be fired up. A solution that worked for me was changing Ora ...

Oracle Help with 9i RAC, dbca fails with quorum file

We're installing Oracle RAC on Linux Red Hat AS 2.1 for a development environment. Patching to 9.2.0.4. The OUI install and patch went fine for both nodes, the Cluster Manager install and patch went fine. Was able to bring up oracm on each node and was able to start the GSD on each node. Started the ...

Oracle 10g dbca fails

I just installed 10g on Fedora Core 1. When I try to start dbca I get:[oracle@dhcppc6 bin]$ ./dbcaException in thread "main" java.lang.NullPointerExceptionat oracle.sysman.assistants.util.NetworkUtils.getOneLocalListenerProtocolAddress(NetworkUtils.java:2441)What does this mean, and how do I fix it? ...

reinstall db, dbca fails with oracle not available

I installed a new 10gR2 database from a template tested at another site. First install was fine except for some tablespace variance issues from additional scripts. Removed db with dbca, no problems. Now, 3 days later, on the same box, trying to reinstall with (or without) the script, dbca fails with ...

Oracle dbca database creation fails

I'm trying to create a database using dbca (10.2.0.1 on AIX 5.2). The machine has 2GB memory. The output of ulimit -a is:time(seconds) unlimitedfile(blocks) unlimiteddata(kbytes) unlimitedstack(kbytes) 4194304memory(kbytes) unlimitedcoredump(blocks) unlimitednofiles(descriptors) unlimitedI've tried ...

Oracle 10g R2 dbca fails in Solaris 10

I am facing the following problem in Solaris 10 SPARC 64 bit machine.1. Downloaded Oracle 10g R2 installable from oracle2. Created user oracle and group dba and modified project settings and permissions as per quick installation guide3. Installation of software is successful. But dbca fails with fol ...

Oracle Please help::DB Creation with DBCA fails to configure Enterprise manager

I have successifully installed Oracle 10g on my windows 2003 server. however when select the option to create a database during installation or when I try to create a database with DBCA I keep on getting the error that "Enterprise manager configuration failed due to the following error - Error updat ...

Oracle 11g R1 DBCA fails on AIX 6.1, pls help (ORA-27123)

I have just installed Oracle 11g r1 on my AIX 6.1 (6100-00-04-0815) system and cannot create a database via the dbca. Installation went smooth, but when I hit finish from the DBCA console I get the following error: ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0ORA-27123: unable to atta ...

DBCA fails to start on Solaris8/Oracle 10g

DBCA fails to start on Solaris 8 with 10.2.0.3 Oracle home bash-2.03$ dbca &[1] 29429bash-2.03$ Exception in thread "main" [1]+ Exit 1 dbcaAnyone encountered it earlier? ...

dbca fails -- oracle not availabe.

hii m using dbca to create db using ASM.problem is its prompting only oracle not available twice or thrice only.but when i tried to create db using normal fs.it created.whats wrong.i have 4 partition using ASM.its on local hdd.my OS is win xp sp3db version 11gR1.rgrds ...

dbca fails hp-ux 11i v3 oracle 11g R2

dbca fails on Hp-Ux Itanium (11.31) oracle 11g R2After installing properly oracle (software only) dbca wokrs fine and opens.When press finis button to create an new database (aslo to create scripts) it fails.Her is the trace log of dbca [AWT-EventQueue-0] [ 2010-08-16 11:59:26.394 IDT ] [RuntimeExec ...

Oracle dbca hangs up:(

all. Need help. I want to create an additional database using dbca... i went through all settings(template-general purpose) and then I pressed finish. "Loading database template. Please wait..."for an hour:( i tried 3 times with out success.. What may be wrong? ...

Oracle dbca error

When I' m trying to launch dbca from my linux machine I'm getting the below error:[oracle@demodb01 DEMOA1 ~]$ dbcaException in thread "main" [oracle@demodb01 DEMOA1 ~]$ ...

Oracle DBCA not properly start

-bash-3.2$ dbcaUnsatisfiedLinkError exception loading native library: njni10Exception in thread "main" java.lang.UnsatisfiedLinkError: getat oracle.net.common.NetGetEnv.get(Native Method)at oracle.net.config.Config.getNetDir(Unknown Source)at oracle.net.config.Config.initConfig(Unknown Source)at ora ...

Oracle GetRight fails with Jdeveloper HTTP download

Running GetRight 45c on NT4SP6Attempt to download JDeveloper 9i Base Install using the HTTP linkGet an error 'GetRight has downloaded a web page : http://profile.oracle.com/jsp/realms/otnLogin.jsp?remotelp=210.84.112.254&globalId=&redirectUrl=http%3a%2f%2download-west.oracle.com%3a80%2fotn%2 ...

Oracle OCIStmtFetch Fails do I need to do an exec again

Here is my problem. We have a C program that goes out and retrieves data from the V$datafile view. Every once in awhile we receive an ORA-00235 error which the only remedy for this according to Oracle metalink support is to try the query again. The problem is that this sometimes happens when we are ...

Oracle DBCA NOT IDENTIFY RAC OPTION

I tried to install RAC from version 9.0.1 enterprise edition on solaris8 and two node sun cluster version3 platform.As per the step by step guide for installation I did the pkgadd on ORCLudlm and installed the oracle 9.0.1 enterprise edition with the seeded database option.Oracle options documentati ...