How to send Jumbo frames ?

I intend to write a small utility that can send Jumbo frames. I have a Ethernet Gigabit card.
At the moment, I can send only normal frames with size below 1500 octets. When I specify a higher size, the sendto function return an error value.
I appreciate any suggestions. It's urgent.

problem with memory and jumbo frames

I'm a new linux user. I would like to increase the size of the mtu on my gigabit ethernet nic (eth6) for jumbo frames. When I do this (using "mtu" in /etc/network/interfaces) I get stuff like this on the console:swapper: page allocation failure. order:2, mode:0x20[<c0143449>] __alloc ...

Jumbo frames on IBM 1 Gigabit - TX iSCSI TOE PCI-X Adapter?

We're expanding our iSCSI SAN (mainly used from windows servers) onto a Power6 520 (an 8203-E4A) using an IBM 1 Gigabit - TX iSCSI TOE PCI-X Adapter (pn 03N6056, fc 5713). The server is running AIX5.3 ML11.However it seems there's no way to configure the adapter to use jumbo frames (that typically g ...

Enabling jumbo frames on multi-homed host

I have a question about enabling jumbo frames on a multi-homed host. I am currently implementing a dedicated backup network. One connection going to the production network for end-user connectivity, jumbo frames not enabled. The other connection going to the dedicated backup network, enabling jumbo ...

SEA : Non Jumbo Frames to Jumbo Frames

We are about to replace our current network switches by new ones (stacks) which allow Jumbo Frames (MTU 9000).Currently our dual VIO setup and the SEA don't use this feature.What I would like to do is (Primary VIO for Ethernet: A ; Secondary VIO for Ethernet: B):(1) Drop the SEA on B(2) Recreate the ...

Ubuntu setting jumbo frames on Maxtor Central Axis

It runs linux, so this question isn't totally in the wrong place - fact is you guys know just about everything.Does anyone know how to set jumbo frames on this device? Maxtor 1 TB Central Axis (in case the title didn't make it clear). ...

Jumbo Frames sort of working

Hi. I am working on a program to send jumbo frames at a fast rate using sockets over udp. I am using Fedora Core 5 - kernel 2.6.20-1.2320. So far this is what I've accomplished:1.) The network adapter is set up to handle jumbo frames. Mtu = 9000.2.) I can send repeated udp packets of size 8192 bytes ...

Jumbo frames

Anybody in here got jumbo frames to work in linux? I am trying to get it set up in the driver, but I don't know if it works. In xp it has an effect of about 20% from 37 to 44MB/s, but it appears that some other setting also is needed to be set for the speed in linux to also go up. Perhaps removing t ...

jumbo frames support on 10/100 eth card

Does anyone know if there is a way to received jumbo ethernet frames ( > 1500 bytes) with eth10/100 card -- such as Intel 82551IT ??Operating at kernel level, I am able to successfuly send jumbo frames.But I cannot receive such frames.I guess if the driver can process those packets on the way out ...

Oracle Setting iSCSI to use jumbo frames

We have a iSCSI SAN network, and we would like to set the iSCSI so that the network can use jumbo frames (9000 byte frames). Our 10g installation is already set to 8k block size. Has anyone done this? Our iSCSI is a Promise V300i ...

Ubuntu M1710 with Jumbo Frames (BCM5752)

I have a Dell XPS M1710 with a build-in Broadcom NIC (BCM5752). I am trying to set the MTU for the interface to 9000 bytes in Ubuntu Linux. I know the card permits such a function because in Windows I can set the MTU to 9000 with proper functionality.# ifconfig eth0 mtu 9000SIOCSIFMTU: Invalid argum ...

Ubuntu Jumbo Frames on Realtek RTL8111/8168B (9k MTU) fails poor performance

HelloI am having issues with my Ubuntu server - Windows and Opensolaris drivers allowed the network card to use JUMBO FRAMES (9k MTU). Ubuntu it seems like it is not working.I have a gigabit LAN at home, and on the other operating systems I used to be able to push data at 60MB/s rates. Today 20MBPS. ...

Ubuntu Recommend a Gigabit NIC which supports jumbo frames (>=9000 MTU)?

I am looking for a PCI Ethernet adapter which supports jumbo frames. The card I have now - Trendnet TEG_PCITXR - says it supports jumbo frames but it turns out the MTU is 7200 bytes. Yeah this is more than 1500, but it seems like a bit of a scam to me. Since it is nearly impossible to find these spe ...

Ubuntu How do I enable Jumbo frames on a iface configured as manual?

I have an Ata-over-Ethernet system that run on Ubuntu server 9.10 and I need to set Jumbo frames to 5400 for the client. How do I go about doing that as a manual iface configuration does not accept setting the the mtu size according to the manual.Current conf for the AoE nic is:auto eth2iface eth2 i ...

Ubuntu Jumbo Frames wierdness

Hopefully someone can shed some light on a problem I seem to be having. I'm running gig ethernet in my house, but whenever I crank the MTU to 9000 on my network card, I get some weird issues. It seems that once I put it to anything over 1500, it will "drop" off the network if traffic with ...

Ubuntu enable jumbo frames on intrepid (mtu 4000)

I'm using Intrepid-amd64 and currently Gnome's NetworkManager Applet is setting up my NIC via DHCP.I found that I can right-click the applet>edit connections and there is a blank for 'mtu' which defaults to 'automatic.' I can manually type in 4000 and then I assume it's using the 4k frame size.I' ...

Ubuntu Problem with jumbo frames + internet gateway

I'm having an issue were some web sites will not load when I have jumbo frames enabled. The ubuntu box has 100M ethernet interface connecting to the modem, and 1 gigabit NIC connecting to the LANBy setting up a proxy the problem goes away, but that would be because the LAN clients are not actually c ...

Ubuntu Jumbo Frames - How To ?

I've looked through the forums and I can find no clear How-To about setting Jumbo frames. I'm running 7.10 at the moment.Here's what I know about this :1. I have had a look at ifconfig -a, which tells me what my two NIC cards are set to. One (eth0) is a USRobotics 7902 and is not used in Ubuntu (it' ...

Ubuntu HP Proliant uServer & Jumbo frames

I have one of these HP MicroServers (http://h10010.www1.hp.com/wwpc/uk/en/sm/WF05a/15351-15351-4237916-4237917-4237917-4248009.html) I'm currently running ubuntu server 10,10 64bit on it with 5gb ram.If I look at the hardware spec using lshw I find that it contains the following:*-networkdescription ...

Ubuntu Getting jumbo frames working

I just got a gigabit switch which supports jumbo frames, and I wanted to get it set up on both my computers. My Windows box was easy, but I'm having a bit of trouble with Ubuntu. Here's what I've done so far:I thought that a simple "ifconfig eth1 mtu 9000" would do the trick, but that alwa ...

Ubuntu Jumbo frames and gigabit switching

I'm considering buying a Netgear GS716T (http://netgear.com/products/details/GS716T.php) to complete a recent home wiring installation.For a few reasons that are out of my control, the cable modem is located in a portion of the house inaccessible by a Cat5e drop. To link it to the keystones the mode ...

Ubuntu Nvidia 6150 SE Integrated Ethernet and Jumbo Frames?

Running 11.04 on an Emachines Athlon II x 2 box..http://www.emachines.com/products/products.html?prod=EL1352-07eIt has the Nvidia GEforce 6150 SE in it. I can't seem to get Jumbo frames working on the Nic.I have tried via the Network Connections Gui as well as the command line:# ifconfig eth0 mtu 90 ...

Oracle Jumbo Frames support on OVM Server

Is there a way to enable Jumbo Frames on OVM PIF? (any mtu larger than 1500)When I try to use 'ifconfig' command from0 I get "invalid argument" error message.My NIC supports Jumbo Frames for sure.. I wonder if this is supported by Oracle VM Server 3.0.# cat /etc/issueOracle VM server release 3.0.0Hy ...

Ubuntu Gigabit Networking and Jumbo Frames

I am trying to get my internal network to gigabit. I have a Gigabit switch that is behind a gigabit firewall/router. The connection between the switch and router is running at gigabit speeds.However my main Linux box is my "server" I just put in a new DLink DGE-530T 10/100/1000 Network car ...

How to send the video frames as bytes across the network using tcp/udp/or any sockets

How to send the video frames as bytes across the network using tcp/udp/or any sockets? ...

jQuery frames/iframes syntax?

I would like to reference some elements in an iframe on the page.A reference in stock javascript would look like this:window.frames[0].document.getElementsByTagName('head');But I haven't been able to figure out the analogous jQuery call ...Could someone provide the syntax for this? (i.e ...

jQuery Get elements with a given class and send it with load()

I have a list like this :<ul><li value='1'></li><li value='2'></li><li value='3'></li><li value='4'></li><li value='5'></li></ul>When I click on a list, I add the "selected" class with toggle().I want to send li with t ...

Frames with JQuery. Possible?

Hianyone have an example using JQuery to "simulate" frames? I'm looking tips to avoid html frameset.Cheers ...

jQuery Sending form to php to send mai

<HTML><BODY style="word-wrap: break-word; -khtml-nbsp-mode: space; -khtml-line-break: after-white-space; ">Hello, I've been trying to submit a Form to a php file to send an email. I've already tested the script without jquery, to make sure the php works ok.<DIV><BR class="khtml- ...

How to access contents of frames/iframes with jQuery?

(Second question in as many days...  I guess I'm the overeager noob.  :) )Last night I watched John Resig's screencast "Hacking Digg with Firebug and jQuery" (<span style="font-style: italic;">highly</span> recommended, BTW: <a href="http://ejohn.org/blog/h ...